POWERBLADE LTMCLSPBSL2A LN4 20V Cordless Electric Line User Manual

LN4 Line Trimmer Kit

User Manual

[Revision 1.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

THE BATTERY MAY HAVE SO

ME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

NOTE: Battery and charger

may not be included with your

purchase. Please refer to your

product’s online listing to

know what is included.

LN4 Line Trimmer Kit

E&OE © PowerBlade 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Wor

k areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear

appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

• P

etrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• U

sing a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

• K

eep packaging away from children and

pets, potential risk of suffocation or

choking.

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 3

General Electrical Safety

• I

nspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• E

lectrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• T

he equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

HAZARDOUS COMPONENTS!

• BE

AWARE THAT THE EQUIPMENT MAY INCLUDE HAZARDOUS COMPONENTS, SUCH AS BLADES, HOT SURFACES AND MOVING

PARTS.

• MOVING BLADES CAN CAUSE SERIOUS INJURY AND EVEN DEATH IF USED IMPROPERLY OR WITHOUT SUFFICIENT PPE.

• DO NOT USE THIS EQUIPMENT ON UNEVEN SURFACES AND ALWAYS MAINTAIN GOOD BALANCE WHEN USING THIS EQUIPMENT.

FAILURE TO DO SO MAY CAUSE SERIOUS INJURY.

• MAINTAIN A SECURE GRIP OF THE TRIGGER ASSEMBLY AT ALL TIMES.

Line Trimmer Safety

• W

ARNING: ONLY USE THE AUTHORIZED BATTERY CARTRIDGES AND CHARGERS. USE OF ANY OTHER BATTERY CARTRIDGES

AND CHARGERS MAY CAUSE INJURY AND/OR FIRE.

• WARNING: DO NOT USE A CORDED POWER SUPPLY SUCH AS A BATTERY ADAPTER OR PORTABLE POWER PACK. THE CABLE OF

SUCH POWER SUPPLY MAY HINDER THE OPERATION AND RESULT IN PERSONAL INJURY.

• NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and may be used for comparing

one tool with another.

• NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.

• NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and may be used for comparing one

tool with another.

• NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.

Intended Use

• T

he cordless lawn trimmer/edge trimmer is intended to be used only by adults who have read and understood the instructions and warnings in

this manual and can be considered responsible for their actions.

• The product is only intended for use outdoors in a well-ventilated area. For safety reasons, the product must be adequately controlled using two-

handed operation.

• When fitted with the lawn trimmer head (and appropriate guard), the product is intended for cutting long grass, pulpy weed, and similar vegetation

at or near ground level. The cutting plane should be approximately parallel to the ground surface when trimming and approximately vertical when

edging.

• The product should not be used to cut or trim hedges, bushes, or other vegetation where the cutting plane is not parallel to the ground surface.

• Do not use the product for any other purpose.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 4

General Safety Warnings

• W

ARNING: READ ALL SAFETY WARNINGS AND INSTRUCTIONS. FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY

RESULT IN ELECTRIC SHOCK, FIRE, AND/OR SERIOUS INJURY.

• WARNING: WHEN USING THE PRODUCT, THE SAFETY RULES MUST BE FOLLOWED. FOR YOUR OWN SAFETY AND THAT OF

BYSTANDERS, PLEASE READ THESE INSTRUCTIONS BEFORE OPERATING THE PRODUCT. KEEP THE INSTRUCTIONS SAFE FOR

LATER USE.

• WARNING: THIS PRODUCT IS NOT INTENDED TO BE USED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL, MENTAL, OR

SENSORY CAPABILITIES. CHILDREN SHOULD BE ADEQUATELY SUPERVISED TO ENSURE THEY DO NOT PLAY WITH THE

PRODUCT.

• WARNING: SOME REGIONS HAVE REGULATIONS THAT RESTRICT THE USE OF THE PRODUCT. CHECK WITH YOUR LOCAL

AUTHORITY FOR ADVICE.

Training

• R

ead the instructions carefully. Be familiar with all controls and the proper use of the product.

• Never allow children or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator.

• Keep bystanders, children, and pets 15 m away from the area of operation. Stop the product if anyone enters the area.

• Never use the product when you are tired, ill, or under the influence of alcohol, drugs, or medicine.

• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

Preparation

• Wear

full eye and hearing protection while operating the product. If working in an area where there is a risk of falling objects, head protection

must be worn.

• Hearing protection may restrict the operator’s ability to hear warning sounds. Pay particular attention to potential hazards around and inside the

working area.

• Wear long trousers, boots, and gloves. Do not wear loose-fitting clothing, short trousers, jewellery of any kind, or use the product with bare feet.

• Secure long hair so it is above shoulder level to prevent entanglement in moving parts.

• Before use and after any impact, check that there are no damaged parts. A defective switch or any part that is damaged or worn should be

properly repaired or replaced by an authorised service centre.

• Make sure the cutting attachment is properly installed and securely fastened.

• Never operate the product unless all guards, deflectors, and handles are properly and securely attached.

• Consider the environment in which you are working. Keep the working area free from wires, sticks, stones, and debris, which if struck by the

cutter can become thrown objects.

Battery Tool Use and Care

• R

echarge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire

when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When the battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects

that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If the liquid

contacts eyes, seek additional medical help. Liquid ejected from the battery may cause irritation or burns.

Lawn Trimmer / Edge Trimmer Safety Warnings

• D

o not operate the machine in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by

lightning.

• Thoroughly inspect the area for wildlife where the machine is to be used. Wildlife may be injured by the machine during operation.

• Thoroughly inspect the area where the machine is to be used and remove all stones, sticks, wires, bones, and other foreign objects. Thrown

objects can cause personal injury.

• Before using the machine, always visually inspect to ensure that the cutter and the cutter assembly are not damaged. Damaged parts increase

the risk of injury.

• Keep guards in place. Guards must be in working order and properly mounted. A guard that is loose, damaged, or not functioning correctly may

result in personal injury.

• Keep all cooling air inlets clear of debris. Blocked air inlets and debris may result in overheating or risk of fire.

• Wear eye protection and ear protection. Adequate protective equipment will reduce personal injury.

• While operating the machine, always wear nonslip and protective footwear. Do not operate the machine when barefoot or wearing open sandals.

This reduces the chance of injury to the feet from contact with the moving cutter.

• Always wear clothing such as trousers that cover the operator's legs while operating the machine. Contact with the moving cutter or line may

cause injury.

• Keep bystanders away while operating the machine. Thrown debris can result in serious personal injury.

• Do not operate the machine above waist height. This helps prevent unintended cutter contact and enables better control of the machine in

unexpected situations.

• Exercise caution when operating the machine in wet grass. Walk, never run. This reduces the risk of slipping and falling, which may result in

personal injury.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 5

• Do not operate the machine on excessively steep slopes. This reduces the risk of loss of control, slipping, and falling, which may result in

personal injury.

• When working on slopes, always be sure of your footing. Always work across the face of slopes, never up or down, and exercise extreme caution

when changing direction. This reduces the risk of loss of control, slipping, and falling, which may result in personal injury.

• Keep all power cords and cables away from the cutting area. Power cords or cables may be hidden in hedges or bushes and can be accidentally

cut or damaged by the line or cutter.

• Keep all parts of the body away from the moving trimmer cutter or line. Do not clear material from the machine until it has been disconnected

from the power source. The moving trimmer cutter or line may result in serious personal injury.

• Carry the machine with the machine switched off and away from your body. Proper handling of the machine will reduce the likelihood of

accidental contact with a moving trimmer cutter or line.

• Only use replacement cutting heads and trimmer cutters or lines specified by the manufacturer. Do not replace the trimmer cutters or lines with

metal wires or blades. Incorrect replacement parts may cause loss of control, breakage, and injury.

• When clearing jammed material or servicing the machine, make sure the switch is off and the battery pack is removed. Unexpected starting of the

machine while clearing jammed material or servicing may result in serious personal injury.

• WARNING: ENSURE THAT THE LINE CUT-OFF BLADE IN THE GUARD IS PROPERLY POSITIONED AND SECURED BEFORE EACH

USE.

Transportation and Storage

• S

top the product, remove the battery pack, and allow it to cool down before storing or transporting.

• Clean all foreign material from the product.

• Do not store or transport the product with batteries fitted; remove and secure separately. Store the product in a cool, dry, and well-ventilated

place that is inaccessible to children. Keep away from corrosive agents, such as garden chemicals and de-icing salts. Do not store outdoors.

• For transportation in vehicles, secure the product against movement or falling to prevent injury to persons or damage to the product.

Transporting Lithium Batteries

• T

ransport the battery in accordance with local and national provisions and regulations. Follow all special requirements on packaging and labeling

when transporting batteries by a third party.

• Ensure that no batteries can come in contact with other batteries or conductive materials while in transport by protecting exposed connectors with

insulating, non-conductive caps or tape. Do not transport batteries that are cracked or leaking. Check with the forwarding company for further

advice.

Maintenance

• W

ARNING: USE ONLY ORIGINAL MANUFACTURER’S REPLACEMENT PARTS, ACCESSORIES, AND ATTACHMENTS. FAILURE TO DO

SO CAN CAUSE POSSIBLE INJURY, CONTRIBUTE TO POOR PERFORMANCE, AND MAY VOID YOUR WARRANTY.

• WARNING: SERVICING REQUIRES EXTREME CARE AND KNOWLEDGE AND SHOULD BE PERFORMED ONLY BY A QUALIFIED

SERVICE TECHNICIAN. FOR SERVICE, WE SUGGEST YOU BRING THE PRODUCT TO YOUR NEAREST AUTHORIZED SERVICE

CENTER FOR REPAIR. WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS.

• Switch off and remove the battery pack before conducting any maintenance or cleaning work.

• You may make adjustments and repairs described in this manual. For other repairs, contact an authorised service agent.

• For replacement line, use only nylon filament line of the diameter described in the specification table of this manual.

• After extending new cutter line, always return the product to its normal operating position before starting.

• After each use, clean the product with a soft, dry cloth. Any part that is damaged should be properly repaired or replaced by an authorised service

centre.

• Check all nuts, bolts, and screws at frequent intervals for proper tightness to ensure the product is in safe working condition. Any part that is

damaged should be properly repaired or replaced by an authorised service centre.

• Bring the product to an authorised service centre to replace damaged or unreadable labels.

Residual Risk

Even when the product is used as prescribed, it is still impossible to completely eliminate certain residual risk factors. The following hazards may

ar

ise during use, and the operator should pay special attention to avoid the following:

• Injury caused by vibration: Hold the product by designated handles and restrict working time and exposure.

• Injury caused by exposure to noise: Wear hearing protection and limit exposure.

• Injury caused by flying debris: Wear eye protection at all times.

Risk Reduction

It has been reported that vibrations from handheld tools may contribute to a condition called Raynaud’s Syndrome. Symptoms may

include tingling,

numbness, and blanching of the fingers, usually apparent upon exposure to cold. Hereditary factors, exposure to cold and dampness, diet, smoking,

and work practices are all thought to contribute to the development of these symptoms. There are measures that can be taken by the operator to

possibly reduce the effects of vibration:

• Keep your body warm in cold weather. When operating the product, wear gloves to keep the hands and wrists warm. It is reported that cold

weather is a major factor contributing to Raynaud’s Syndrome.

• After each period of operation, exercise to increase blood circulation.

• Take frequent work breaks. Limit the amount of exposure per day.

• If you experience any of the symptoms of this condition, immediately discontinue use and see your physician.

• WARNING: INJURIES MAY BE CAUSED, OR AGGRAVATED, BY PROLONGED USE OF A TOOL. WHEN USING ANY TOOL FOR

PROLONGED PERIODS, ENSURE YOU TAKE REGULAR BREAKS.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 6

Additional Safety Instructions for Your Battery Charger

WARNING:

READ ALL SAFETY WARNINGS AND INSTRUCTIONS. FAILURE TO FOLLOW THE WARNINGS AND INSTRUCTIONS MAY

RESULT IN ELECTRIC SHOCK, FIRE, AND/OR SERIOUS INJURY. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE

REFERENCE.

This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of

experience and knowledge, if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be carried out by children without

supervision.

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.

• Before charging, read the instructions. After charging, disconnect the battery charger from the supply mains. Then remove the chassis connection

and then the battery connection.

• Do not charge a leaking battery.

• Do not use chargers for purposes other than those for which they are designed.

• Before charging, ensure your charger matches the local AC supply.

• For indoor use only, do not expose to rain.

• The charging device must be protected from moisture.

• Do not use the charging device outdoors.

• Do not short out the contacts of the battery or charger.

• Respect the polarity “+/-” when charging.

• Do not open the unit and keep it out of the reach of children.

• Do not charge batteries from other manufacturers or incompatible models.

• Ensure that the connection between the battery charger and battery is correctly positioned and not obstructed by foreign objects.

• Keep the battery charger’s slots free of foreign objects and protect them from dirt and humidity. Store in a dry and frost-free place.

• When charging batteries, ensure that the battery charger is in a well-ventilated area and away from flammable materials. Batteries can get hot

during charging. Do not overcharge any batteries. Ensure that batteries and chargers are not left unsupervised during charging.

• Do not recharge non-rechargeable batteries, as they can overheat and break.

• Longer life and better performance can be obtained if the battery pack is charged when the air temperature is between 18°C and 24°C. Do not

charge the battery pack in air temperatures below 5°C or above 35°C. This is important as it can prevent serious damage to the battery pack.

• Charge only battery packs of the authorised same model.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 7

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 8

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 9

Table of Contents

Safety ......................................................................................................................................................... 2

Safety Symbols ........................................................................................................................................................... 7

Parts Identification .................................................................................................................................. 10

Assembly ................................................................................................................................................. 12

Mounting the Auxiliary Handle .................................................................................................................................. 12

Mounting the Guard .................................................................................................................................................. 13

Installing the Battery Pack ........................................................................................................................................ 14

Operation ................................................................................................................................................. 15

Switching On/Off ....................................................................................................................................................... 15

Adjusting the Length of Tool ..................................................................................................................................... 16

Adjusting the Angle of Trimmer Head....................................................................................................................... 16

Using the Flower Protection ..................................................................................................................................... 17

Edging Trimming ....................................................................................................................................................... 17

General Trimming Instructions ................................................................................................................................. 18

Line Feeding ............................................................................................................................................................. 19

Charging the Battery ................................................................................................................................................. 20

Lithium Battery Care and Maintenance .................................................................................................. 22

Top 3 Battery Care Requirements ............................................................................................................................ 22

Maintenance ............................................................................................................................................. 24

General ..................................................................................................................................................................... 24

Replacing the Line Spool .......................................................................................................................................... 24

Cleaning .................................................................................................................................................................... 25

Transport .................................................................................................................................................................. 25

Storage ..................................................................................................................................................................... 25

Disposal .................................................................................................................................................................... 26

Troubleshooting ...................................................................................................................................... 27

Specifications .......................................................................................................................................... 28

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 10

Parts Identification

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 11

No. Name

1 Handle

2 Switch Trigger

3 Safety Switch

4

Auxiliary Handle Button

5

Auxiliary Handle

6

Pipe Sleeve

7

Telescoping Lock Clip

8 Aluminium Pipe

9 Motor Housing

10 Flower Protection

11

Trimmer Head

12

Guard

13

Battery Pack

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 12

Assembly

1. Unpack all parts and lay them on a flat, stable surface.

2. Remove all packing materials and shipping devices, if applicable.

3. If you find that parts are missing or show damage, do not use the product but contact your dealer. Using an

incomplete or damaged product represents a hazard to people and property.

4. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes

suitable personal protective equipment.

WARNING: Wear protective gloves for this assembly work and always lay the product on a flat and

stable surface while assembling. Follow the assembly instructions step-by-step and use the pictures

provided as a visual guide to easily assemble the product. Do not insert the battery cartridges before the

power tool is completely assembled or adjusted.

Mounting the Auxiliary Handle

1. Keep the auxiliary handle button pressed, then fix the auxiliary handle to the trimmer.

2. Release the button until you achieve your satisfied position. Make sure the auxiliary handle is well engaged

before the next step.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 13

Mounting the Guard

WARNING: To reduce the risk of injury to persons, do not operate without guards in place.

1. Attach the front part of the safety guard to the trimmer head.

2. Attach the back part of the safety guard to the trimmer head until the latch clicks into place.

3. Secure the guard to the line trimmer with the supplied T20 screw.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 14

Installing the Battery Pack

1. Insert the charged battery into the battery docking port.

2. Ensure the battery is well seated.

3. To remove the battery from the machine, press the battery unlock button and pull the battery out.

Note: Using unsuitable batteries can lead to malfunctions or damage to the machine.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 15

Operation

WARNING: Inspect the tool for complete installation. Any missing, damaged, or misplaced parts may

cause serious injury. Wear eye protection, long trousers, and stout shoes at all times while operating the

power tool.

Switching On/Off

1. Keep the safety switch pressed first.

2. Then press the switch trigger to switch the product on. Release the safety switch once the product is

running.

3. Release the switch trigger to switch the product off.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 16

Adjusting the Length of Tool

1. Unlock the telescoping lock clip and stretch the aluminium pipe to your desired length.

2. Lock the clip again when you have finished your adjustment.

Adjusting the Angle of Trimmer Head

1. Keep pressing the angle adjustment button.

2. Hold the body of the trimmer and adjust it to the desired position.

3. Listen for a "click" sound to confirm the trimmer head is securely engaged.

Five optional angles (0°~65°) are available to meet your usage requirements.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 17

Using the Flower Protection

1. Switch the flower protection to the working state by pulling it down and clamping it into the slot.

2. When the flower protection is not in use, reset it by flipping it upside.

Edging Trimming

WARNING: Risk of Eye Injury. Use safety glasses or similar eye protection.

When used as an edger, stones, pieces of metal, and other objects can be thrown out at high speed by the line.

The trimmer and guard are designed to reduce the danger. However, make sure that other persons and pets are

at least 100 feet (30 meters) away.

1. Remove the battery from the trimmer.

2. Press the angle adjustment knob and simultaneously turn the head of the trimmer clockwise until it stops.

3. Release the telescoping lock clip.

4. Hold the metal shaft and rotate the lower housing 90°.

5. Lock the telescoping lock clip.

6. Insert the battery and use the guide wheel to operate edging.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 18

General Trimming Instructions

1. Stand in the operating position. Stand up straight. Do not bend over. Keep feet apart and firmly planted.

2. Move the trimmer left and right, keeping it well away from your body. Cut all grass from top to down.

3. Inspect the working area and remove all debris that may be entangled in the trimmer head. Also, remove any

objects that the product may throw during cutting.

4. If the trimmer head becomes wrapped with grass, stop the trimmer and clean it up.

5. Avoid trees, flowers, stones, walls, and other objects that can cause the line to break.

6. Check and feed the line regularly to maintain full cutting width and performance.

Note: Some line breakage will occur due to:

− Entanglement with foreign matter.

− Normal line fatigue.

− Attempting to cut thick vegetation.

− Forcing the line into objects such as walls or fence posts.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 19

Line Feeding

Automatic Line Feeding

The trimmer is equipped with an automatic feeding system. The system feeds line with every press of the switch

trigger.

Manual Line Feeding

Press the line-feed button and adjust the line to the desired length.

1. Press the button (①).

2. Pull the line out (②).

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

E&OE © PowerBlade 20

Charging the Battery

USE THE BATTERY CHARGER ONLY WITH AUTHORISED 20V LITHIUM-ION BATTERIES.

Battery packs are shipped in a low charge condition to prevent possible issues. Therefore, you should charge

them prior to use.

NOTE: Batteries will not reach full charge the first time they are charged. Allow several cycles (operating

the tool followed by recharging the batteries) for them to fully charge.

To Charge

1. Use this battery charger only with

authorised 20V Lithium-ion batteries.

2. Ensure the power supply is normal

house voltage, 220-240 volts, 50 Hz,

AC only.

3. Connect the charger to the power

supply. The light will be GREEN,

indicating that the power is on.

4. Slide the battery pack into the

charger.

5. Press down on the battery pack to

ensure the contacts on the battery

pack engage properly with the

charger contacts.

6. The charger light will illuminate. A

constant RED light indicates the

battery is charging. A constant

GREEN light indicates the battery is

fully charged.

7. A minimum charge time of 80

minutes is required to recharge a

completely discharged battery pack.

8. The battery pack will become slightly

warm to the touch while charging.

This is normal and does not indicate

a problem.

9. DO NOT place the charger in an area of extreme heat or cold. It will work best at normal room temperature.

10. - When the battery is fully charged, unplug the charger from the power supply and remove the battery pack.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

Battery Capacity

By pressing the button, the LED display shows the battery capacity.

LED Function of Charger

The LED will light up to indicate the status of the charger and battery pack:

•

One constant green LED with no battery installed = Power is on.

•

One constant red LED = Battery pack is charging.

•

One constant green LED = Battery pack is fully charged.

Important Information for Recharging Hot Batteries

When using a tool continuously, the battery pack may become hot. You should allow a hot battery pack to cool

down for approximately 30 minutes before attempting to recharge it.

NOTE: If the charger does not charge your battery pack under normal circumstances, please contact the

manufacturer or an authorised service centre.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

11. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged for 1.5 hours on the initial charge and 1.5 hours for each subsequent

charge.

12. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

13. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again.

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating, or fire may result.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

Maintenance

WARNING: Remove the battery cartridges before maintenance! Wear protective gloves and clothing!

Always wear protective equipment such as gloves and eye protection to reduce the risk of injury when

operating this unit. Only perform repairs and maintenance work according to these instructions! All

further work must be performed by a qualified specialist! When servicing, use only identical replacement

parts. Use of any other accessory or attachment may increase the risk of injury.

General

•

When servicing, use only identical replacement parts. The use of any other parts may create a hazard or

cause product damage.

•

Do not allow brake fluids, gasoline, petroleum-based products, penetrating oils, etc., to come into contact

with plastic parts at any time. These substances contain chemicals that can damage, weaken, or destroy

plastic.

•

DO NOT abuse power tools. Abusive practices can damage tools as well as the workplace.

•

Do not attempt to modify or create accessories not recommended for use with the charger. Any such

alteration or modification is misuse and could result in a hazardous condition, leading to possible serious

personal injury.

Replacing the Line Spool

WARNING: Risk of injury due to the cutting tool. Only adjust the device with the motor switched off, the

battery removed, and the cutting tool at a standstill. Do not reach into the area of the rotating line.

Always remove the battery before working on the device.

Notice: Use only 1.4 mm diameter round nylon monofilament line. Do not use serrated or heavier gauge

line, as they will overload the motor and cause overheating.

Notice: Before you begin trimming, only use the appropriate type of cutting line. Only use authorized

replacement spool.

1. Firmly press both (①) of the engaging lugs of the spool cap together at the same time and pull the cap off

(②).

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

2. Remove the line spool (③). If necessary, remove any dirt.

3. Extend the line out of the new spool fitting (④).

4. Insert the spool in the line receptacle (⑤).

5. Thread the end of the line of the coil through the eye of the thread receptacle (⑥).

6. Firmly press both of the engaging lugs of the spool cap together at the same time and push the cap onto the

spool until it engages (⑦).

Cleaning

1. Switch the product off and pull out the battery pack.

2. Use a small brush to clean the outside of the unit. Do not use strong detergents. Household cleaners that

contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic. Wipe off

any moisture with a soft cloth.

Note: If the trimmer head is blocked by foreign objects during operation, stop the product, wait until the

product stops entirely, then remove the foreign objects and clean the trimmer head. Clean moving parts

may result in hazardous injury.

Transport

•

Always carry the product by its handle.

•

Clean the product as described above.

•

Protect the product from any heavy impact or strong vibrations that may occur during transportation in

vehicles.

•

Secure the product to prevent it from slipping, falling over, or causing damage or injury.

Storage

•

Clean the product as described above.

•

Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.

•

We recommend using the original package for storage or covering the product with a suitable cloth or

enclosure to protect it against dust.

•

Always store the product in a place that is inaccessible to children. The ideal storage temperature is between

0°C and 40°C.

Note: To prolong battery life, never store the battery pack in a completely discharged condition. Make

sure the battery pack is charged once per year or when the LED indicator shows only one light.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

Disposal

•

Waste products should not be disposed of with household waste. Please recycle where facilities exist. Check

with your local authority or retailer for recycling advice.

•

During operation, grasses or weeds may be cut by the unit; users should clean these objects to protect the

environment.

•

Electrical products should not be discarded with household products. Used electrical products must be

collected separately and disposed of at collection points provided for this purpose. Consult your local

authorities or dealer for advice on recycling.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

Troubleshooting

Problem Cause Solution

The device switches off.

1. The battery pack is too hot.

2. The battery pack is discharged.

3. The temperature of the device

(electronics) is too high.

1. Allow the battery pack to cool.

2. Charge the battery pack.

3. Allow the device to cool and, if

necessary, clean the ventilation

slots.

The device will not turn on.

1. The battery pack is discharged.

2. Battery pack temperature too high

or too low.

3. The battery pack is defective.

1. Charge the battery pack.

2. Allow the battery pack to cool

down or heat up.

3. Replace the battery pack.

Automatic line adjustment does

not work.

1. The line spool is empty.

2. The line spool is dirty.

3. The line has torn off and is pulled

into the line spool. The line has

become caught in the spool.

4. The line is melted onto the spool.

1. Replace the line spool.

2. Use a brush to remove dirt from

the parts.

3. Take off the line spool; if

necessary, rewind the line and

insert the spool.

4. Remove the melted line part; if

necessary, rewind the line and

insert the spool.

The line breaks off too frequently.

The line comes into contact too

frequently with fixed objects, e.g.

fences, trees, etc.

Use the plant protection guard.

Strong vibrations.

Device fasteners have come loose. Consult technical support.

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

LN4 Line Trimmer Kit

Specifications

Battery Type Lithium Ion

Battery Voltage 20V

Battery Capacity 2.0Ah

Noise Level 96dB

Cutting Diameter 300mm

Trimmer Line φ1.6mm

Charger 240V

Charge Time 90 mins

Runtime Up to 28 mins

Power Source Battery

Power Plug Australian Standard

Note: Requires minimal assembly

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE POWERBLADE

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

POWERBLADE LTMCLSPBSL2A LN4 20V Cordless Electric Line Trimmer & Garden Edger, Skin Only

Product's Documents

Product manual

Specifications

POWERBLADE LTMCLSPBSL2A Questions and Answers