BAUMR-AG PLTCLSBMLNSA LN3 20V SYNC Cordless 2in1 Trimmer User Manual

LN3 Line Trimmer Kit

User Manual

[Revision 2.0]

READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND

MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may vary in

appearance, assembly, inclusions, specifications, description, and packaging.

THE BATTERY MAY HAVE SO

ME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY IS CHARGED PRIOR TO USE.

NOTE: Battery and charger

may not be included with your

purchase. Please refer to your

product’s online listing to

know what is included.

LN3 Line Trimmer Kit

E&OE © Baumr-AG 2

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• Before Use - If you are not familiar with the

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases, or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

•

Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

•

Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol, or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory, or

mental capabilities.

General Fuel Safety

•

Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well-ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start, or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

•

Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors, and

vents.

General Equipment Use and Care

•

The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage, or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• Store the equipment out of reach of

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases, or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids, or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 3

General Electrical Safety

•

Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Always use a Residual Current Device

(RCD) (GFCI) / Earth Leakage Circuit

Breaker / Safety Switch when operating this

item (electrical items only).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

•

Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

•

The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories, or performing repair or

maintenance.

• Do NOT adjust while the equipment is

running.

• Perform service-related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Child Choking Hazard!

• W

ARNING: CHOKING HAZARD - CHILDREN UNDER 8 YRS. CAN CHOKE OR SUFFOCATE ON SMALL PARTS. ADULT

SUPERVISION REQUIRED.

• Carefully inspect anything a baby or child could gain access to, including this product & packaging.

• Dangers include anything of a size that could become stuck or lodged in a baby or child's airway.

• Dangers include things like raw, hard fruit and vegetable pieces, large pieces of meat, bones or sausage skins, popcorn, nuts,

hard lollies and corn chips, small magnets and batteries, coins, beads, marbles and small uninflated balloons, broken toys and smaller toys,

buttons, keys, and coins. But there are also many more.

• Pay particular attention to accessories, nuts, bolts, screws, washers, caps, covers, loose parts, parts that could be removed or break off, pieces

of packaging, staples, tape etc.

• In the case of any doubt, secure the item of concern in an appropriate manner, or completely remove the possibility of access by a baby or child.

Important Safety Reminders

• BE

AWARE THAT THE EQUIPMENT MAY INCLUDE HAZARDOUS COMPONENTS, SUCH AS BLADES, HOT SURFACES AND MOVING

PARTS.

• MOVING BLADES CAN CAUSE SERIOUS INJURY AND EVEN DEATH IF USED IMPROPERLY OR WITHOUT SUFFICIENT PPE.

• DO NOT USE THIS EQUIPMENT ON UNEVEN SURFACES AND ALWAYS MAINTAIN GOOD BALANCE WHEN USING THIS EQUIPMENT.

FAILURE TO DO SO MAY CAUSE SERIOUS INJURY.

• MAINTAIN A SECURE GRIP OF THE TRIGGER ASSEMBLY AT ALL TIMES.

General Safety Warnings

•

Never allow children, persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge or people unfamiliar with

these instructions to use the machine, local regulations may restrict the age of the operator.

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children.

General Power Tool Safety Warnings

• W

ARNING! READ ALL SAFETY WARNINGS, INSTRUCTIONS, ILLUSTRATIONS, AND SPECIFICATIONS PROVIDED WITH THIS POWER

TOOL. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND /OR SERIOUS

INJURY. SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.

• The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

•

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• Do not operate power tools in explosive Atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks

which may ignite the dust of fumes.

• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical Safety

•

Power plugs tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk of electric shock.

• Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 4

• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of

electric shock.

• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the

risk of electric shock.

Personal Safety

•

Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under

the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.

• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions will reduce personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may

result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust

collection can reduce dust-related hazards.

• Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

Power Tool Use and Care

•

Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for

which it was designed.

• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must

be repaired.

• Disconnect the plug from the power source and/ or remove the battery pack, if detachable, from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the

power tool. Power tools are dangerous in the hands of untrained users.

• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power

tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

• Use the power tool, accessories, and tool bits etc. in accordance with these instructions, considering the working conditions and the work to be

performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

• Keep handles and grasping surfaces dry, clean, and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe

handling and control of the tool in unexpected situations.

Battery Tool Use and Care

•

Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire

when used with another battery pack.

• Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, or other small metal objects

that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts

eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

• Do not use battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire,

explosion, or risk of injury.

• Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130℃ may cause explosion.

• Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions. Charging

range may damage the battery and increase the risk of fire.

Service

•

Have your power tools serviced by a qualified repair person using only identical replacement parts. This will ensure that safety of the power tool is

maintained.

• Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Training

•

Read the instructions carefully. Be familiar with the controls and the correct use of the machine.

• Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict the age of the operator.

• Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 5

Preparation

•

Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use, disconnect the cord

from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do not use the machine if the cord is

damaged or worn.

• Before use, always visually inspect the machine for damaged, missing or misplaced guards or shields.

• Never operate the machine while people, especially children, or pets are nearby.

Operation

•

Keep supply and extension cords away from cutting means.

• Wear eye protection and stout shoes at all times while operating the machine.

• Avoid using the machine in bad weather conditions especially when there is a risk of lightning.

• Use the machine only in daylight or good artificial light.

• Never operate the machine with damaged guards or shields or without guards or shields in place.

• Switch on the motor only when the hands and feet are away from the cutting means.

• Always disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the disabling device or removable battery).

• whenever the machine is left unattended.

• before clearing a blockage.

• before checking, cleaning, or working on the machine.

• after striking a foreign object.

• whenever the machine starts vibrating abnormally.

• Take care against injury to feet and hands from the cutting means.

• Always ensure that the ventilation openings are kept clear of debris.

Maintenance and Storage

•

Disconnect the machine from the power supply (i.e. remove the plug from the mains, remove the disabling device or removable battery) before

carrying out maintenance or cleaning work.

• Use only the manufacturer’s recommended replacement parts and accessories.

• Inspect and maintain the machine regularly. Have the machine repaired only by an authorized repairer.

• When not in use, store the machine out of the reach of children.

Additional Safety Warnings for Battery Pack

•

Battery pack needs to be charged before use.

• Always refer to the charger’s instruction and charge it Properly.

• Remove the battery pack from the product when not in use.

• Don’t maintain the battery pack on the charger when not in use.

• After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain the maximum

performance.

• Longer life and better performance can be obtained if the battery is charged when the air temperature is between 18°C and 24°C. Do not charge

the battery in air temperature below 5℃ or above 40℃.This is important as it can prevent serious damage to the battery.

• Do not charge battery in a damp or wet location. Following this rule will reduce the risk of electric shock.

• Do not disassemble the battery and avoid mechanical damage to the battery. Risk of short circuit and fumes may be emitted. Ensure fresh air

and seek medical assistance in the event of discomfort.

• When disposing of battery pack, keep the battery pack of different electrochemical systems separate from each other.

Vibration and Noise Reduction

To reduce the impact of noise and vibration emission, limit the time of operation, use low-vib

ration and low-noise operating modes as

well as wear personal protective equipment. Take the following points into account to minimise the vibration and noise exposure risks:

• Only use the product as intended by its design and these instructions.

• Ensure that the product is in good condition and well maintained.

• Use correct attachments for the product and ensure they are in good condition.

• Keep tight grip on the handles/grip surface.

• Maintain this product in accordance with these instructions and keep it well lubricated (where appropriate).

• Plan your work schedule to spread any high vibration tool use across a longer period of time.

• Prolonged use of the product exposes the user to vibrations that can cause a range of conditions collectively known as hand-arm vibration

syndrome (HAVS) e.g. fingers going white; as well as specific diseases such as carpal tunnel syndrome. To reduce this risk when using the

product, always wear protective gloves and keep your hands warm.

Emergency

•

Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter.

This will help to prevent risks and hazards.

• Always be alert when using this product, so that you can recognise and handle risks early. Fast intervention can prevent serious injury and

damage to property.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 6

• Switch the product off and remove the battery pack if there are malfunctions. Have the product checked by a qualified professional and by a

qualified professional and repaired, if necessary, before you operate it again.

Residual risks

Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following

danger

s can arise in connection with the structure and design of this product:

• Health defects resulting from vibration emission if the product is being used over long periods of time or not adequately managed and properly

maintained.

• Injuries and damage to property due to broken attachments or the sudden impact of hidden objects during use.

• Danger of injury and property damage caused by flying objects.

Recycling and Disposal

•

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.

• Check with your Local Authority or local store for recycling advice.

• The product comes in a package that protects it against damage during shipping. Keep the package until you are sure that all parts have been

delivered and the product is working properly. Recycle the package afterwards.

Disposal of an Exhausted Battery Pack

•

The battery is Li-Ion type. To preserve natural resources, please recycle or dispose of the battery pack properly. Consult your local waste

authority for information regarding available recycling and / or disposal options.

• Discharge your battery pack by operating your tool, then remove the battery pack from the tool and cover the battery pack connections with

heavy duty adhesive tape to prevent short circuit and energy discharge.

• Do not attempt to open or remove any of the components.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 7

Safety Symbols

The product may have safety warning labels attached to it, explained below. Understand the symbols on your

product and their meanings. If any stickers become unreadable, unattached etc., replace them.

Flammable Material Hazard

Flammable liquids, gases, or

substances etc may present.

Avoid ignition sources and open

flames. Danger of fire.

Read User Manual

Read and fully understand

product safety warnings,

operation, procedures etc before

using the product.

Use Hand Protection

Wear appropriate hand protection

and take due care as the product

or use of the product may present

hand hazards.

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Electrocution / Electrical Shock

Hazard

High voltage or high current

electricity may be present or

required by the product. Take

due care when handling electrical

products, cables, plugs and

leads. Electrical shock can be

fatal.

Toxic Fumes / Dust Hazard

Using the product or by-products

from use may produce fumes,

smoke or particles that could be

harmful if inhaled. Wear

appropriate breathing protection

and have adequate ventilation.

Explosive Material Hazard

Combustible liquids, gases, or

substances etc may be present.

Avoid ignition sources and open

flames. Danger of explosion.

Cutting / Amputation Hazard

The product may have blades,

edges or mechanical devices that

can cause severe cut injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Crush Hazard

The product may have blades,

edges or mechanical devices that

can cause severe crush injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Single Operator Only

The product must be operated by

a single person only. More than

one person operating the product

may introduce additional hazards.

Use Face Protection

Wear appropriate full-face

protection and take due care as

the product or use of the product

may present face and eye

hazards.

Use Foot Protection

Wear appropriate foot protection

and take due care as the product

or use of the product may present

foot hazards.

Use Eye / Ear / Head Protection

Wear appropriate eye and / or

ear and / or head protection and

take due care as the product or

use of the product may present

eye, hearing, and head hazards.

Running Hazard

Do not run on or near the product

as doing so may present a fall

hazard.

Diving Hazard

Do not dive into the product as

doing so may present a neck /

head injury hazard.

Adult Supervision Required

Always supervise children and

other users of a product to

prevent drowning or injury.

Skin Penetration / Puncture

Hazard

The product may produce

pressure, emit liquids or objects

that can cause severe injury to

fingers, limbs, blood etc. Take

due care when handling and

using the product.

Hot Surface Hazard

Be aware that the product may

produce high temperatures and

hot surfaces that can cause burn

injuries.

Flying Debris Hazard

Be aware that the product or use

of the product may present

hazards produced by flying

debris. Wear appropriate clothing

and protective devices.

Moving Parts Hazard

Be aware that the product

contains or uses mechanical

devices that move or rotate.

Always wait for moving parts to

stop fully before handling the

product, adjusting, maintenance

etc.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 8

Carbon-Monoxide Hazard

Do not use the product in

confined areas or without

adequate ventilation. Carbon-

monoxide poisoning can be fatal.

Pull Hazard

Be aware that the product

contains or uses mechanical

devices that can pull in objects

and can cause severe injury to

fingers, limbs etc. Take due care

when handling and using the

product.

Slope / Fall Injury Hazard

Be aware that using the product

on sloping surfaces or in slippery

conditions may present additional

dangers from falls and contact

with blades, moving parts, hot

surfaces etc.

"Slam Dunk" Warning

Do NOT attempt "slam dunk"

manoeuvres as this may result in

severe injury due to falling,

product breakage or collapse etc.

Electrocution / Electrical Shock

Hazard - Outdoor

High voltage or high current

electricity may be present or

required by the product. Do NOT

use in rain, damp, or wet

conditions. Electrical shock can

be fatal.

Electrocution / Electrical Shock

Hazard - Disconnect

High voltage or high current

electricity may be present or

required by the product. Always

disconnect the product from the

electrical supply before handling

the product, adjusting,

maintenance etc.

Power Line Electrocution

Hazard

High voltage / high current power

lines may be present. Use

extreme caution to avoid contact

or interference with power lines.

Electrical shock can be fatal.

"Kick-Back" Hazard

High level of "kick-back" hazard

that can cause the machine to

suddenly rotate towards operator.

Kick-back injury can be fatal.

Winch Operator Position

Hazard

Do NOT stand between winch

and load. Do NOT use winch to

move people.

Winch Lift Hazard

Do NOT LIFT load vertically. Use

machine to PULL only.

Cable Hazard

Ensure that load bearing cable is

not kinked or knotted.

Winch Cable Hazard

Ensure that there is a minimum

number of cable coils on

winching mechanism.

Winch Hook Hazard

Carry hook to load – do NOT

throw or run.

Flash / Blinding Hazard

Wear appropriate eye protection

for welding. Direct exposure to

weld arcs may cause permanent

eye injury.

Laser Hazard

Laser may be in use – do NOT

look directly at laser or allow

others to.

Choking Hazard

Children under 8 yrs. Can choke

or suffocate on small parts. Adult

supervision required.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 9

Table of Contents

Safety ............................................................................................................................................................. 2

Safety Symbols ........................................................................................................................................................... 7

Parts Identification ..................................................................................................................................... 11

Spare Parts .................................................................................................................................................. 12

Assembly ..................................................................................................................................................... 13

Unpacking ................................................................................................................................................................. 13

You Will Need / Before You Start ............................................................................................................................. 13

Set-Up ....................................................................................................................................................................... 13

Guard ................................................................................................................................................................. 14

Battery Pack ............................................................................................................................................................. 14

Attaching / releasing the battery pack ................................................................................................................ 14

Charging the battery pack .................................................................................................................................. 15

Battery capacity indicators ................................................................................................................................. 15

Operation ..................................................................................................................................................... 16

Intended Use ............................................................................................................................................................ 16

Auxiliary Handle Adjustment ..................................................................................................................................... 16

Length Adjustment .................................................................................................................................................... 16

Main Handle Angle Adjustment ................................................................................................................................ 16

Trimmer Head Tilt Adjustment .................................................................................................................................. 17

Trimmer Wheel ......................................................................................................................................................... 18

Guard ........................................................................................................................................................................ 18

Switching ON/OFF .................................................................................................................................................... 18

General Operation .................................................................................................................................................... 19

Trimming ................................................................................................................................................................... 19

Edging ....................................................................................................................................................................... 20

Tips ........................................................................................................................................................................... 20

Line Feeding ............................................................................................................................................................. 21

Manual Feeding ........................................................................................................................................................ 21

Auto-Feeding ............................................................................................................................................................ 22

After Use ................................................................................................................................................................... 22

Lithium Battery Care and Maintenance .................................................................................................... 23

Top 3 Battery Care Requirements ............................................................................................................................ 23

Maintenance ................................................................................................................................................ 25

The Golden Rules for Care ....................................................................................................................................... 25

General Cleaning ...................................................................................................................................................... 25

Guard ........................................................................................................................................................................ 25

Trimming Line ........................................................................................................................................................... 25

Storage ........................................................................................................................................................ 28

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 10

Transportation ............................................................................................................................................ 28

Troubleshooting ......................................................................................................................................... 29

Specifications ............................................................................................................................................. 30

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 11

Parts Identification

No. Name No. Name

1 Main handle 10 Unlock button for tilt adjustment

a. Indicator triangle*

2 On/off switch 11 Guard

a. Screw*

b. Knife

c. Screw hole*

d. Knife protector*

3 Rear safeguard 12 Trimmer head

a. Cover

b. Release latch (x2)

c. Trimming spool

d. Trimming line

e. Housing

f. Sliding slot (x2)*

g. Release push button

h. Eyelet

i. Screw hole*

4

Battery docking port

13

Trimming wheel Screw (x2)*

5

Upper pole

14

Air vents

6

Unlock button for angle adjustment

15

Auxiliary handle

a. Lock button

7

Locking sleeve for length adjustment

16

Battery pack

8 Lower pole 17 Charger

9 Pole support

NOTE: Parts marked with * are not shown in this overview.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 12

Spare Parts

Spare parts available for purchase, scan QR codes below:

QR Code SKU

PLTCLSBMLN3A

PLTCLSBMLNSA

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 13

Assembly

Unpacking

1. Unpack all parts and lay them on a flat, stable surface.

2. Remove all packing materials and shipping devices if applicable.

3. Make sure the delivery contents are complete and free of any damage. If you find that parts are missing and

show damage do not use the product but contact your dealer. Using an incomplete or damaged product

represents a hazard to people and property.

4. Ensure that you have all the accessories and tools needed for assembly and operation. This also includes

suitable personal protective equipment.

WARNING! The product and the packaging are not children’s toys! Children must not play with plastic

bags, sheets, and small parts! There is a danger of choking and suffocation!

You Will Need / Before You Start

Items not included:

•

Suitable personal protective equipment

•

Suitable crosshead driver

Items included:

•

Guard (11)

•

Screw (11a)

•

Battery pack (16)

•

Charger (17)

NOTE: Battery and charger may not be included with

your purchase. Please refer to your product’s online

listing to know what is included.

Set-Up

WARNING! The product must be fully assembled before operation! Do not use a product that is only

partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and

use the pictures provided as a visual guide to easily assemble the product! Do not connect the product

to battery pack (16) before it is completely assembled!

NOTE: Take care of small parts that are removed during assembly or when adjusting. Keep them secure

to avoid loss.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 14

Guard

1. Turn the trimmer head (12) upside down.

2. Align two tips of the guard (11) with the sliding slots (12f) of the trimmer head (12) (Fig. 1, step 1). Fully

insert the guard (11) and make sure that the screw holes (11c, 12i) are well aligned.

3. Secure the guard (11) with the screw (11a) in clockwise (Fig. 1, step 2).

WARNING! Never use the trimmer head (12) without the guard (11) property fitted.

Battery Pack

Attaching / releasing the battery pack

1. Align the battery pack (16) with the sliding slots of the battery docking port (4) under the rear safeguard (3)

and slide the battery pack in to attach it. Ensure it clicks in place (Fig. 2).

2. Press the release button (16c) and remove the battery pack (16) from the battery docking port (4) (Fig. 3).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 15

Charging the battery pack

The battery pack (16) for this product has been shipped in a low charge condition.

Battery capacity indicators

The battery pack is equipped with the battery capacity indicators which are used to give an indication of the

battery pack’s remaining capacity. Press the battery capacity button to check battery capacity. The LEDs will

stay lit for approximately 2 seconds.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 16

Operation

Intended Use

•

This cordless grass trimmer is designated with a rated voltage of 18V. It is designed only to be used with the

battery pack.

•

The product is intended for cutting weed, grass or similar soft vegetation in areas that are hard to reach, e.g.

under bushes, on slopes and edges. It may not be used to work on unusual thick, dry or wet grass, e. g.

pasture grass, or to shred leaves.

•

For safety reasons it is essential to read the entire instruction manual before first operation and to observe

all the instructions therein.

•

This product is intended for private domestic use only, not for any commercial trade use. It must not be used

for any purposes other than those described.

Auxiliary Handle Adjustment

Adjust the angle of the auxiliary handle (15) to fit the

intended application.

1. Loosen the lock button (15a) clockwise (Fig.5, step 1),

then rotate the auxiliary handle (15) forward or

backward to adjust the angle (Fig. 5, step 2).

2. Tight the lock button (15a) in anti- clockwise to secure

the auxiliary Length adjustment in position (Fig.5, step

3).

Length Adjustment

Adjust the pole length to fit the body length.

1. Loosen the locking sleeve (7) in clockwise (Fig. 6, step

1).

2. Pull the lower pole (8) out or push it together to adjust the

desired length (Fig. 6, step2).

3. Tighten the locking sleeve (7) in anticlockwise (Fig. 6, step

3).

Main Handle Angle Adjustment

Adjust the main handle (1) to either 0° for trimming or 180° for

edging.

1. Press down the unlock button (6) and turn the main handle

(1) clockwise while holding lower pole (8) to adjust the

trimmer head (12) to an angle of 180° (Fig. 7). Release the

unlock button (6) and keep turning the main handle (1) until it

locks in place. Ensure the unlock button (6) snaps into place.

2. Press down the unlock button (6) and turn the main handle

(1) anticlockwise while holding lower pole (8) to adjust the

trimmer head (12) to an angle of 0° (Fig. 8). Release the unlock button (6) and keep turning the main handle

(1) until it locks in place. Ensure the unlock button (6) snaps into place.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 17

WARNING! Always ensure that the unlock button (6) snaps into place after adjusting the main handle in

one of the end positions! Never adjust to an intermediate position!

Trimmer Head Tilt Adjustment

Tilt the angle of trimmer head to fit the ground conditions for trimming or edging use by aligning the indicator

triangle (10a) on unlock button (10) with one of three indicators of the pole support (9) (Fig. 9).

1. Push the unlock button (10) and hold it in position (Fig.10, step 1).

2. Move the lower pole (8) slightly up or downward (Fig.10, step 2).

3. Release the unlock button (10) and keep moving the lower pole (8) until it locks in place.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 18

WARNING! Always ensure that the unlock button (10) snaps into place after adjusting the trimmer head

(12) in one of the required positions! Never adjust to an intermediate position!

Trimmer Wheel

1. Use the trimmer wheel (13) to keep distance to obstacles that could be hit by the cutting device.

2. Use the trimmer wheel (13) to cutting the grass at the edges.

Guard

The guard (11) protects the operator against thrown objects during operation. It is equipped with a knife (11b)

that cuts the trimming line (12d) (Fig. 13).

NOTE: Always remove knife protection (11d) before use.

Switching ON/OFF

1. Hold the product with one hand at the auxiliary handle (15) and with the other at the main handle (1).

2. Squeeze the on/off switch (2) to switch the product on (Fig. 14).

3. Release the on/off switch (2) to switch the product off.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 19

General Operation

1. Check the product, its battery pack and charger as well as accessories for damage before each use. Do not

use the product if it is damaged or shows wear.

2. Double check accessories or attachments are properly fixed.

3. Always hold the product by its handles. Keep the handles dry to ensure safe support.

4. Ensure that the air vents are always unobstructed and clear. Clean them, if necessary, with a soft brush.

Blocked air vents may lead to overheating and damage the product.

5. Switch the product off immediately if you are disturbed while working by other people entering the working

area. Always let the product come to complete stop before putting it down.

6. Do not overwork yourself. Take regular breaks to ensure you can concentrate on the work and have full

control over the product.

Trimming

1. Make sure that the knife protector (11d) is removed, the trimming wheel (13) is fixed for use and the battery

pack (16) is assembled before operation.

2. Adjust the main handle (1) angle to 0° for trimming.

3. Hold the product firmly with a gap between the product and your right side.

4. Stand upright, do not lean forward, and pay attention to posture. Keep both feet apart to help retain your

balance.

5. Hold the trimmer head (12) just above the ground at an angle of approximately 30° (Fig. 15).

6. Move the product with a slow regular arc from left to right before moving it back to the starting position

before trimming the next area (Fig. 16).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

E&OE © Baumr-AG 20

7. Ensure the cutting device remains clean and free from off-cuts that may cause it to jam. Check regularly.

Release the on/off switch (2) and remove the battery pack (16) before checking.

8. Trim longer grasses in stages; do not cut long grass in one cut (Fig. 17). For the best results, cut longer

grass in steps (Fig. 18).

Edging

1. Make sure that the knife protector (11d) is removed, the trimming wheel

(13) is fixed for use and the battery pack (16) is assembled before

operation.

2. Adjust the main handle (1) angle to 180° for edging (Fig. 19).

Tips

1. For best results, do not cut wet grass because it tends to stick to the

cutting head and guard, prevents proper discharge of grass trimmings,

and could cause you to slip and fall.

2. Do not allow the spool cover to drag on the ground or other surfaces.

3. Pay special attention when performing the work close to trees and

bushes. The cutting head could damage sensitive bark, and damage

fence posts.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

4. Use the trimming wheel to trimming / edging position to avoid bringing the cutting device into contact with

hard objects such as walls and curbstones (Figs. 20, 21).

NOTE: The trimming line will wear faster and require more replacement if cutting is done along

sidewalks or other abrasive surfaces, or heavier weeds are being cut.

NOTE: While trimming, the cutting device is possible to be blocked by grass or unevenly ground. So, the

product will turn off automatically due to over current. Therefore, release the on/off switch for over 3s

and then press down again to go on with trimming.

Line Feeding

During use, the tip of the trimming line will get shorter due to wear and the trimming line may break. Regularly

check the condition of the trimming line (12d) and adjust if necessary.

WARNING! Always switch the product off, remove the battery pack and let the product cool down before

performing inspection, maintenance, and cleaning work!

NOTE: This product is equipped with an auto-feed head. Do not bump the trimmer head on the ground

as this would damage the product.

Manual Feeding

1. Turn trimmer head (12) upside down.

2. Press the release push button (12g) while pulling on the trimming line (12d). The trimming spool (12c) will

release the trimming line (Fig. 22).

3. Repeat until the worn part of the trimming line (12d) exceeds the distance to the knife (11b).

4. Attach the battery pack and use the product as described. Excess line will be cut by the knife (11b) and

should always remain inside the radius of the guard (11).

WARNING! The trimming line will be thrown out! Danger of injury especially for bystanders!

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

Auto-Feeding

With the product running, release on/off switch (2) to let it stop completely. Press the on/off switch (2) to start the

product.

NOTE: The trimming line will extend about 3-5 mm with each stop and start until the line reach the length

of the knife. Avoid stop and start frequently as the trimming line may auto-feed unintentionally and

causes waste a lot of line.

After Use

1. Switch the product off, remove the battery back and let it cool down.

2. Attach the knife protector (11d) if necessary.

3. Check, clean and store the product as described in the Maintenance section.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

Lithium Battery Care and Maintenance

Top 3 Battery Care Requirements

1. Charge battery before first use. The battery may arrive with some charge, regardless of this the

battery must be charged for 60 minutes on the initial charge and 60 minutes for each subsequent

charge.

2. Charge battery immediately when it is depleted. Do not store a depleted battery. This will

permanently impact the life of the battery. If the battery is going to be stored for a period of time, fully

charge the battery before storing.

3. Disconnect battery when not in use. To prolong the life of a battery, disconnect it from the unit

when not in use. Disconnect chargers from the battery once charged.

To ensure the battery maintains optimum performance, follow the guidelines outlined below.

•

For best results, charge batteries in temperatures between 10°C and 30°C

•

When battery is charged, disconnect the charger from the power supply and remove the battery from the

charger.

•

If a battery is stored or otherwise unused for an extended period, and the battery has no charge remaining

when you check it, consider it to be damaged. Do not attempt to recharge it or to use it. Replace it with a

new battery.

•

Use only with the battery charger specified by the manufacturer.

•

Ensure that the battery charger electrical cord is not subjected to damage or stress. Do not operate the

battery charger if it has a damaged electrical cord or plug.

•

Do not use the charger in wet areas or expose it to rain or water.

•

The typical estimated life of a Lithium-Ion battery is about two to three years or 300 to 500 charge cycles,

whichever occurs first. One charge cycle is a period of use from fully charged, to fully discharged, and fully

recharged again

•

Explosion hazard – protect the battery against heat, for example, direct sunlight and fire. Do not store

batteries in vehicles or locations subject to heat.

•

Batteries can explode in the presence of an ignition source, such as a pilot light. To reduce the risk of

serious personal injury, never use any cordless product in the presence of open ﬂame. Exploding batteries

can propel debris and chemicals.

•

Do not open the battery – danger of short-circuiting and/or explosion.

•

Do not attempt to destroy or disassemble the battery pack or remove any of its components.

•

Do not touch the battery terminals with metal objects and/or body parts as short-circuit and/or personal injury

may result.

•

Explosion hazard – do not open and/or short-circuit the battery.

•

Poison hazard – battery leakage (liquid ejection). Under extreme conditions, liquid may be ejected from the

battery – avoid contact. If contact accidentally occurs, immediately seek medical attention, and flush with

water. If liquid contacts eyes, immediately seek medical attention, flush with clean water for at least 10

minutes. Liquid ejected from the battery may cause irritation or burns.

•

Dispose of non-serviceable batteries in an environmentally responsible manner and according to local

regulations.

Failure to adhere to the requirements above may result in the battery becoming inoperative or battery life being

reduced. In extreme cases or abuse, battery overheating or fire may result.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

Maintenance

The Golden Rules for Care

WARNING! Always switch the product off, remove the battery pack and let the product cool down before

performing inspection, maintenance, and cleaning work!

1. Keep the product clean. Remove debris from it after each use and before storage.

2. Regular and proper cleaning will help ensure safe use and prolong the life of the product.

3. Inspect the product before each use for worn and damaged parts. Do not operate if you find broken and

worn parts.

WARNING! Only perform repairs and maintenance work according to these instructions! All further

works must be performed by a qualified specialist!

General Cleaning

1. Clean the product with a damp cloth and pH-neutral soap. Use a brush for areas that are hard to reach.

2. Remove stubborn dust with high pressure air (max. 3 bar).

NOTE: Do not use chemical, alkaline, abrasive or other aggressive detergents or disinfectants to clean

this product as they might be harmful to its surfaces.

3. Check for worn or damaged parts. Replace worn parts as necessary or contact an authorised service centre

for repair before using the product again.

Guard

1. Keep the guard (11) clean and free of debris. Remove trimmings.

2. Replace the guard (11) with one of the same types when it is worn or shows damage.

Trimming Line

Replace the trimming spool:

Replace the line spool when it is empty or worn.

1. Turn the product upside down to access the trimming line.

2. Hold the trimmer head (12) steady with one hand. Press the release latches (12b) on both sides, then lift the

cover (12a) and remove it (Fig. 23).

3. Remove the trimming spool (12c) from the housing (12e) (Fig. 24).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

4. Clean the housing (12e) before inserting a new spool (12c) of the same type.

5. Pull the line from the new spool for a length of approx.12 cm.

6. Release the trimming line (12d) from the notches and hold it

in position. Avoid the trimmer line (12d) scatted from the

trimming spool (12c) (Fig. 25, Step 1).

7. Lead the trimming line (12d) ending through the eyelet

(12h) of the housing (12e) (Fig. 25, Step 2).

8. Insert the trimming spool (12c) into the housing (12e) (Fig.

25, Step 3). Twist the trimming spool (12c) until it locks into

place.

9. Refit the cover (12a) and make sure it snaps into place.

Refill the trimming line in trimming spool:

1. Turn the product upside down to access the trimming line.

2. Hold the trimmer head (12) steady with one hand. Press the

release latches (12b) on both sides to remove the cover

(12a).

3. Remove the trimming spool (12c) from the housing (12e).

4. Discard all the remaining line (12d) from the trimming spool

(12c).

5. Clean the housing (12e) and the trimming spool (12c) .

6. Cut a new 4 m long trimming line with a spool (12c) in direction of the arrows (Fig. 26).

7. Lead one end of the new trimming line (12d) through the small eyelet on the trimming spool (12c) in direction

of the arrows (Fig. 26).

8. Pull the trimming line (12d) and bend it over (Fig.27).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

9. Wind all the trimming line (12d) firmly around the spool in direction of the arrows on the trimming spool (12c)

(Fig. 28).

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

Storage

1. Switch the product off and remove the battery pack.

2. Clean the product as described above.

3. Remove the trimming wheel (13) to storage position if necessary.

4. Store the product and its accessories in a dark, dry, frost-free, well-ventilated place.

5. Always store the product in a place that is inaccessible to children. The ideal storage temperature is between

10 °C and 30 °C.

6. We recommend using the original package for storage or covering the product with a suitable cloth or

enclosure to protect it against dust.

Transportation

1. Switch the product off and remove the battery pack.

2. Attach the knife protector (11d) if necessary.

3. Remove the trimming wheel (13) to storage position if necessary.

4. Always carry the product by its handles (1, 15).

5. Protect the product from any heavy impact or strong vibrations which may occur during transportation in

vehicles.

6. Secure the product to prevent it from slipping or falling over.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

Troubleshooting

Suspected malfunctions are often due to causes that the users can fix themselves. Therefore, check the product

using this section. In most cases the problem can be solved quickly.

Problem Possible cause Solution

Product does not start

1. Battery pack not properly attached.

2. Battery pack is discharged.

3. Battery pack is damaged.

4. Other electrical defect to the

product.

1. Attach properly.

2. Remove and charge battery pack.

3. Replace with a new one of the same

type.

4. Check by a specialist electrician.

Product does not reach full

power

1. Battery pack capacity is too low.

2. Air vents are blocked.

1. Charge battery pack.

2. Clean the air vents.

Unsatisfactory result

Trimming line is worn / damaged. Replace with a new one.

Excessive vibration or

noise

1. Trimmer head is damaged.

2. Screw is loose.

3. Trimming line is worn/ damaged.

1. Replace with a new one.

2. Tighten screw.

3. Replace with a new one.

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

LN3 Line Trimmer Kit

Specifications

Battery 20V 2.2Ah Lithium

Trimmer Head Single

Trimmer Line Φ1.6mm

No-Load Speed 9000rpm

Cutting Diameter 230mm

Length 1.12m

Front Handle Adjustable Swivel

Shaft Aluminium Telescopic

Charger 240V

Charging Time 60 Minutes

Running Time 25 Minutes

Power Plug Australian Standard

Note: Requires assembly

BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG BAUMR-AG

Some experts believe that the incorrect or prolonged use of almost any

product may cause serious injury or death. To help reduce your risk of

serious injury or death, refer to the information below. For more information,

see www.datastreamserver.com/safety



Consult all documentation, packaging,

and product labelling before use. Note

that some products feature

documentation available online. It is

recommended to print and retain the

documentation.



Before each use, check the product for

loose/broken/damaged/missing parts,

wear, or leaks (if applicable). Never use a

product with

loose/broken/damaged/missing parts,

wear, or leaks.



Products must be inspected and serviced

(if applicable) by a qualified technician

every 6 months. This is based on

average residential use by persons of

average size and strength, and on a

property of average metropolitan size.

Use beyond these recommendations may

require more frequent

inspections/servicing.



Ensure that all users of the product have

completed a suitable industry recognised

training course before being allowed

access to the product.



The product has been supplied by a general merchandise

retailer that may not be familiar with your specific

application or description of application. Be sure to attain

third-party approval from a qualified specialist for your

application before use, regardless of any assurances from

the retailer or its representatives.



This product is not intended for use where fail-safe

operation is required. As with any product (for example,

automobile, computer, toaster), there is the possibility of

technical issues that may require the repair or

replacement of parts, or the product itself. If the possibility

of such failure and the associated time it may take to

rectify could in any way inconvenience the user, business,

or employee, or financially affect the user, business, or

employee, then the product is not suitable for your

requirements. This product is not intended for use where

incorrect operation or a failure of any kind, including but

not limited to, a condition requiring product return,

replacement, parts replacement, or service by a

technician may cause financial loss, loss of employee

time or an inconvenience requiring compensation.



If this product has been purchased in error when

considering the information presented here, contact the

retailer directly for details of their returns policy, if

required.

diagrams, or images may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying, scanning, or recording, or any information storage and retrieval system,

without express permission or consent from the publisher.

BAUMR-AG PLTCLSBMLNSA LN3 20V SYNC Cordless 2in1 Trimmer & Edger, Adjustable Head, Guide Wheel Features

Product's Documents

Product manual

Specifications

BAUMR-AG PLTCLSBMLNSA Questions and Answers