Loading ...
Loading ...
Loading ...
AXIS M5014 PTZ Dome Network Camera
System Options
To open Plain Config, go to System Op tions > Advanced > Plain Config.
Reset to factory default settings
This will reset all parameters, including the IP address, to the factory default settings:
1. Disconnect power from the product.
2. Press and ho ld the Control button and reconnect power ( see
Hardware overview, on page 4
).
3. Keep the Control button pressed for about 15 seconds until the Status indicator flashes amber.
4. Release the Control button. The process is complete after about 1 minute (when the Status indicator turns green). The
product has been reset to the factory default settings. The default IP address is 192.168.0.90
5. Re-assign the IP address.
It is also possible to reset parameters to factory default via the web interface. Go to Setup > System Options > Maintenance.
38
Loading ...
Loading ...
Loading ...