Loading ...
Loading ...
Loading ...
© Hikvision
Figure 6-5 Port Settings
2. Set the HTTP port, RTSP port and port of the camera.
HTTP Port: The default port number is 80.
RTSP Port: The default port number is 554.
HTTPS Port: The default port number is 443.
Server Port: The default port number is 8000.
Note:
When you use client software to visit the camera and you have changed the server port
number, you have to input the correct server port number in login interface to access to the
camera.
Enhanced SDK Service Port: The default server port number is 8443, and it can be
changed to any port number ranges from 2000 to 65535.
WebSocket Port: The default port number is 7681.
WebSockets Port: The default server port number is 7682.
Note:
WebSocket and WebSockets protocol are used for plug-in free live view. For detailed
information, see Network Service in Section 6.1.2.Network Service.
3. Click
to save the settings.
Configuring NAT (Network Address Translation) Settings
Purpose:
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices. The UPnP protocol allows devices
to connect seamlessly and to simplify the implementation of networks in the house and
corporate environments.
With the function enabled, you don’t need to configure the port mapping for each port, and the
camera is connected to the Wide Area Network via the router.
Steps:
1. Enter the UPnP™ settings interface.
Configuration >Network > Basic Settings > NAT
Loading ...
Loading ...
Loading ...