Loading ...
Loading ...
Loading ...
© Hikvision
Note:
To send the Email when an event occurs, you need to refer to Section 6.1.2 Configuring
Email Settings to set the Email parameters.
Notify Surveillance Center
Send an exception or alarm signal to remote management software when an event
occurs.
Upload to FTP/Memory/NAS
Capture the image when an alarm is triggered and upload the picture to a FTP server.
Note:
You need a FTP server and set FTP parameters first. Refer to Section 6.1.2 Configuring
FTP Settings for setting FTP parameters.
Smart Tracking
Track the moving objects automatically when an alarm is triggered.
Note:
To configure the smart tracking, you need to refer to Section Configuring Smart Tracking
to set the parameters.
White Light Flashing
White light of the camera flashes when alarm happens. Flashing Duration, Flashing
Frequency, and Brightness are configurable on Flashing Alarm Light Output page:
Configuration > Event > Basic Event
Flashing Duration: The time period the flashing lasts when one alarm happens.
Flashing Frequency: The flashing speed of the light. High, Medium, and Low are
selectable.
Brightness: The brightness of the light.
Notes:
Before using the function, go to Configuration -> System -> Maintenance -> System
Service to enabled white light in advance.
The function is only supported by certain camera models.
Audible Warning
Built-in speaker or connected external speaker plays warning sound when alarm
happens. Sound Type and Alarm Times are configurable on Audible Alarm Output page:
Configuration > Event > Basic Event
Alarm Sound Type: The content of audible warning.
Alarm Times: The repeating times of the warning.
Notes:
Before using the function, go to Configuration -> Video/Audio -> Audio to enabled
built-in speaker in advance.
The function is only supported by certain camera models.
Trigger Alarm Output
Trigger one or more external alarm outputs when an event occurs.
Note:
Loading ...
Loading ...
Loading ...