Loading ...
Loading ...
Loading ...
© Hikvision
Figure 6-19 802.1X Settings
3. Check the Enable IEEE 802.1X checkbox to enable it.
4. Select a preferred protocol. EAP-LEAP, EAP-TLS, and EAP-MD5 are selectable.
EAP-LEAP and EAP-MD5
If you use EAP-LEAP or EAP-MD5, the authentication server must be configured. Apply and
register a user name and password for 802.1X in the server.
Input the user name and password to access the server.
EAP-TLS
If you use EAP-TLS, input Identify, Private Key Password, and upload CA Certificate, User
Certificate and Private Key.
5. Set the EAPOL version. The EAPOL version must be identical with that of the router or the
switch.
6. Configure the 802.1X settings, including user name and password.
7. Click
to finish the settings.
Note:
The camera reboots when you save the settings.
8. After the configuration, connect the camera to the protected network.
Integration Protocol
Purpose:
If you need to access to the camera through the third party platform, you can enable
Hikvision-CGI function. And if you need to access to the device through ONVIF protocol, you can
configure ONVIF user in this interface. Refer to ONVIF standard for detailed configuration rules.
Steps:
1. Enter the Integration Protocol configuration interface.
Configuration > Network > Advanced Settings > Integration Protocol
Loading ...
Loading ...
Loading ...