Loading ...
Loading ...
Loading ...
© Hikvision
and taking a capture action. If the detected face stays in the scene for less than the set
filtering time, capture will not be triggered. For example, if the face filtering time is set
as 5 seconds, the camera will capture the detected face when the face keeps staying in
the scene for 5 seconds.
Restore Default: Click
to restore all the settings in advanced configuration to the
factory default.
Chapter 6 Camera Configuration
6.1 Configuring Network Settings
Note:
The functions vary depending on different camera models.
6.1.1 Basic Settings
Configuring TCP/IP Settings
Purpose:
TCP/IP settings must be properly configured before you operate the camera over network. IPv4
and IPv6 are both supported.
Steps:
1. Enter TCP/IP settings interface:
Configuration > Network > Basic Settings > TCP/IP
Loading ...
Loading ...
Loading ...