Loading ...
Loading ...
Loading ...
© Hikvision
Configuring RS-232
The RS-232 port can be used in two ways:
Parameters Configuration: Connect a computer to the camera through the serial port.
Device parameters can be configured by using software such as HyperTerminal. The serial
port parameters must be the same as the serial port parameters of the camera.
Transparent channel: Connect a serial device directly to the camera. The serial device will be
controlled remotely by the computer through the network.
Note:
RS-232 function varies depending on different speed dome models.
Steps:
1. Enter RS-232 Port setting interface:
Configuration> System > System Settings > RS-232
Figure 6-50 RS-232 Settings
2. Configure the Baud Rate, Data Bit, Stop Bit, Parity, Flow Control, and Usage.
Note:
If you want to connect the camera through RS-232 port, the parameters of the RS-232 should
be exactly the same with the parameters you configured here.
3. Click
to save the settings.
RS-485
Purpose:
The RS-485 serial port is used to control the PTZ of the camera. The configuring of the PTZ
parameters should be done before you control the PTZ unit.
Note:
RS-485 function varies depending on different speed dome models.
Steps:
1. Enter RS-485 Port Setting interface:
Configuration> System > System Settings > RS-485
Loading ...
Loading ...
Loading ...