Loading ...
Loading ...
Loading ...
Problem Cause
The engine does not run smooth-
ly
The spark plug is defective.
The carburetor is incorrectly set.
The air filter is clogged. Refer to
To clean and replace the air filter on page 114
.
There is dirt in the carburetor or fuel line.
The engine apparently has no
power
The air filter is clogged. Refer to
To clean and replace the air filter on page 114
.
The spark plug is defective.
There is dirt in the carburetor or fuel line.
The throttle cable is incorrectly adjusted.
The transmission does not have
sufficient power
The cold air intake of the transmission or the cooling fins are blocked.
The fan on the transmission is damaged.
There is no oil in the transmission or the oil level is too low. Refer to
To do a
check of the transmission oil level on page 121
.
The battery does not charge The battery is defective. Refer to
To charge the battery on page 115
.
The connection at the cable connectors on the battery terminals is bad. Refer to
To charge the battery on page 115
.
There is vibration in the product The blades, the pulley or other rotating parts are loose. Refer to
Maintenance on
page 109
.
One or more of the blades are not balanced. Refer to
To examine the blades on
page 119
.
The engine is loose.
The cutting result is unsatisfacto-
ry
The blades are blunt. Refer to
To replace the blades on page 119
.
The grass is long or wet. Refer to
To get a good cutting result on page 108
.
The cutting deck is damaged and not parallel to the ground.
There is grass blockage in the cutting deck. Refer to
To clean the product on
page 111
.
The tire pressure is different on the right and left sides. Refer to
Tire pressure on
page 116
.
The product is operated at a too high ground speed. Refer to
To get a good
cutting result on page 108
.
The engine speed is too low. Refer to
To get a good cutting result on page 108
.
The drive belt loosens from the pulleys.
124 1795 - 002 - 09.12.2022
Loading ...
Loading ...
Loading ...