Loading ...
Loading ...
Loading ...
SDS3000X HD Series Digital Oscilloscope User Manual
int.siglent.com 273
34.3 I/O setting
34.3.1 LAN
Operate the following steps to set the LAN port:
Perform Utility > Menu > I/O > LAN Config to open the LAN Config dialog box.
A. Check Automatic to enable dynamic IP. In this case,
the oscilloscope must be connected to the local area
network with a DHCP server. Contact your network
administrator to confirm the relevant information.
B. When is not checked, the oscilloscope uses static
IP. Set the static IP address, subnet mask, and gateway
separately.
C. If your network provides Dynamic DNS, you can enable
Automatic (DNS) to let the oscilloscope register its
hostname and use the DNS server for name resolution.
D. When is not checked, set the DNS IP address
manually
E. When accessing more than two SIGLENT instruments
through the web browser, it is necessary to set a different
VNC port number for each instrument. The range is from
5900 to 5999.
34.4 Install Options
The SDS3000X HD provides a few options to enhance its functionality. Contact your local SIGLENT
sales representative or SIGLENT technical support to get the corresponding option key. Perform the
following steps to install the option:
Utility > Menu > Software Options
Loading ...
Loading ...
Loading ...