Loading ...
Loading ...
Loading ...
DJI RC Motion 3 User Manual
24
©
2024 DJI All Rights Reserved.
Updating Firmware
Use one of the following methods to update the rmware.
Using DJI Fly App
When used with DJI Avata 2:
Power on the aircraft, goggles, and motion controller. Make sure all the devices are linked.
Connect the USB-C port of the goggles to the mobile device, run DJI Fly, and follow the prompts
to update the rmware. Make sure the mobile device is connected to the internet during the
rmware update.
When used with other DJI aircraft:
Power o the aircraft. Power on goggles and motion controller Connect the USB-C port of the
goggles to the mobile device, run DJI Fly, and select Prole > Device Management. Locate the
corresponding goggles. Select Firmware Update and follow the on-screen instructions to update
the rmware. An internet connection is required during the rmware update.
Using DJI Assistant 2 (Consumer Drones Series)
1. Power on the device. Connect the USB-C port of the device to the computer using a USB-C
cable.
2. Launch DJI Assistant 2 and log in with a DJI account.
3. Select the device and click Firmware Update on the left side of the screen.
4. Select the rmware version.
5. The rmware will be downloaded and updated automatically.
6. The device will restart automatically after the rmware update is complete.
• Make sure to follow all the steps to update the rmware, otherwise the update may
fail.
• Make sure the computer is connected to the internet during the update.
• Do not unplug the USB-C cable during an update.
• The rmware update will take several minutes. Please wait patiently for the rmware
upgrade to complete.
• Before performing an update, make sure the device is at least 15% charged.
• Note that the update may reset the parameters. Before updating, take note of your
preferred settings and recongure them after the update.
Visit the following link and refer to the Release Notes for rmware update information:
https://www.dji.com/rc-motion-3/downloads
Loading ...
Loading ...