Loading ...
Loading ...
Loading ...
Note
The alarm output duraon ranges from 0 s to 3599 s.
3.
Set Temperature Unit.
4.
Check to enable Do Not Open Barrier When Lane is Not Clear.
5.
Drag the block or enter the value to adjust the light board brightness.
6.
Set the alarm buzzer beeping duraon, door closing delay me, intrusion duraon, overstaying
duraon and IR obstructed duraon.
7.
Check to enable Memory Mode at your actual needs.
Note
Mulple cards presenng for mulple person passing is allowable when enabling the memory
mode. When the passing person's number exceeds the card presenng number, or aer the
latest person passing with no other person passing within the door open duraon, the door will
close
automacally.
8.
Choose the control mode.
So Mode
The barrier will be closed aer the person has passed through the barrier when there are
tailing, forced accessing, etc.
Guard Mode
The barrier will be closed immediately when there are tailgang, forced accessing, etc.
9.
Set the
re input type.
10.
Click to enable Motor Self-Test and choose the main lane or sub lane to start motor self-
tesng.
11.
Click Save.
6.5.12 Card
Sengs
Set Card Security
Click Conguraon → Card Sengs → Card Type to enter the sengs page.
Set the parameters and click Save.
Enable NFC Card
In order to prevent the mobile phone from
geng the data of the access control, you can
disable NFC card to increase the security level of the data.
Enable M1 Card
Enable M1 card and authencang by presenng M1 card is available.
M1 Card Encrypon
Sector
DS-K3B530X Series Swing Barrier User Manual
59
Loading ...
Loading ...
Loading ...