Hikvision DS-K3B530LX User Manual

Loading ...

The authencaon indicator board is connected to the LED1 terminal of main lane control board.

4.3.9 RS-485 Wiring

The RS-485 interfaces on the access control board and sub extended interface board are suggested

to connect with the face

recognion module or the card reader. Here takes connecng with a card

reader as an example.

Note

●

There are 2 RS-485 interfaces on the access control board for entrance. Refer to Access Control

Board Terminal Descripon (Oponal) for details.

There are 2 RS-485 interfaces on the sub extended interface board for exit. Refer to for details.

●

connecng the RS-485 with a card reader, by default, the DIP switch of the card reader should

be set as follows:

○

For entrance, set the No.1 of the 4-digit DIP switch to ON side.

○

For exit, set the No.3 of the 4-digit DIP switch to ON side.

●

If there are other RS-485 devices

connecng, the ID of the RS-485 cannot be conicted.

●

The connected 12 V power interface for the face recognion terminal cannot be connected with

other 12 V devices.

Figure 4-11 Wiring RS-485

4.3.10 RS-232 Wiring

Note

●

There is 1 RS-232 interface on the extended interface of access control board, see Access Control

Board Terminal Descripon (Oponal) . The RS-232A corresponds to UART 1 on web.

●

There is 1 RS-232 interface on the sub extended interface board, see . The RS-232B corresponds

to UART 2 on web.

The RS-232C interface is reserved.

DS-K3B530X Series Swing Barrier User Manual

Loading ...

Hikvision DS-K3B530LX Pro Swing Barriers