Loading ...
Loading ...
Loading ...
Steps
Note
Some device models do not support this funcon. Refer to the actual products when conguraon.
1.
Click Conguraon → Access Control → Wiegand Sengs .
2.
Select Entrance or Exit.
3.
Enable Wiegand
funcon.
4.
The wiegand transmission direcon is set Input by default.
Note
Input: the device can connect a Wiegand card reader.
5.
Click Save to save the sengs.
Note
If you change the peripheral, and aer you save the device parameters, the device will reboot
automacally.
Host Parameters
Set door contact sengs and RS-485 protocol.
Steps
1.
Click
Conguraon → Access Control → Host Parameter to enter the page.
2.
Set door contact.
Note
You can set the door contact as Door Open Status or Door Closed Status according to your
actual needs. By default, it is Door Open Status.
3.
Set RS-485 protocol.
4.
Click Save.
Set Terminal Parameters
Set the working mode and remote vericaon.
Steps
1.
Click
Conguraon → Access Control → Terminal Parameters to enter the page.
DS-K3B530X Series Swing Barrier User Manual
54
Loading ...
Loading ...
Loading ...