Hikvision DS-K3B530LX User Manual

Loading ...

Temperature Unit

Select the temperature unit that displayed in the device status.

Click OK.

8.7.2 Congure Other Parameters

Aer adding the access control device, you can set its parameters such as network parameters,

capture parameters, RS-485 parameters, Wiegand parameters, etc.

Set Parameters for Face Recognion Terminal

For face recognion terminal, you can set its parameters including face picture database, QR code

authencaon, etc.

Steps

Note

This funcon should be supported by the device.

Enter the Access Control module.

On the

navigaon bar on the le, enter Advanced Funcon → More Parameters .

Select an access control device in the device list and click Face Recognion Terminal.

Set the parameters.

Note

These parameters displayed vary according to dierent device models.

COM

Select a COM port for conguraon. COM1 refers to the RS-485 interface and COM2 refers to

the RS-232 interface.

Face Picture Database

select Deep Learning as the face picture database.

Authencate by QR Code

If enabled, the device camera can scan the QR code to authencate. By default, the funcon

is disabled.

Blocklist Authencaon

If enabled, the device will compare the person who want to access with the persons in the

blocklist.

If matched (the person is in the blocklist), the access will be denied and the device will upload

an alarm to the client.

If mismatched (the person is not in the blocklist), the access will be granted.

DS-K3B530X Series Swing Barrier User Manual

112

Loading ...

Hikvision DS-K3B530LX Pro Swing Barriers