Loading ...
Loading ...
Loading ...
AXIS M7014
System Options
If using a host name for the NTP server, a DNS server must be configured. See
DNS Configuration, on page 33
.
• Set m anually a llows you to manually set date and ti m e.
If using an NTP server, select your Time zone from the drop-down list. If required, check Au tomatically adjust for daylight saving
time changes.
The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the
predefined formats or see
File Naming & Date/Time Formats
in the online help for information on how to create custom date and
time formats. To include da te and time in the overlay text, go to Video and select Include da te and Include time.
Network
Basic TCP/IP Settings
The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneo usly, and at least one version
must always be enabled.
IPv4 Address Confi guration
By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are
configured under System Options > Network > TCP/IP > Basic.
DHCP (Dynamic Host Configuration Protocol) allows network administrators to centrally manage and automate the assignment of
IP addresses. DHCP should only be enabled if using dynamic IP address notification, or if the DHCP can u pdate a DNS server. It is
then possible to access the Axis product by name (host name).
If DHCP is e nabl ed and the product cannot be accessed, run AXIS IP Utility to search the network for connected Axis prod ucts , or reset
the product to the factory default settings (see
page 39
) and then perform the installation again.
To use a static IP address, check Use the following IP a ddress and specify the IP address, subnet mask and default router.
IPv6 Address Confi guration
If IPv6 (IP version 6) is enabled, the Axis product will receive an IP address according to the configuration in the network router.
To enable IPv6, go to System Options > Network > TCP/IP > Basic. Other settings for IPv6 should be configured in the network router.
ARP/Ping
The IP address can be set using A RP a nd Ping. For instructions, see the product’s Installation Guide.
ARP/Ping is enabled by d efa u lt. To d isa ble , uncheck the box unde r System O ptions > Network > TCP/IP > Basic.
The ARP/Ping service is a utomatically disabled two minutes after the product is started, or as soon as an IP address is set. T o reset the
IP address, the product must be restarted to activate ARP/Ping for an additional tw o minutes.
Pinging the product is still possible w hen this service is disabled.
AXIS Video Hosting System (AVHS)
AVHS used in conjunction with an AVHS service, provides easy and secure Internet access to live a nd recorded video accessible from
any location. For more information and help to find a local AVHS Service Pro vider go to www.axis.com/hosting
AVHS is enabled by default. The settings a re configured under System Options > Network > TCP IP > Basic.
One-click enabled - Press the product’s control button (see
Hardware Overview, on page 4
) to connect to an AVHS service over the
Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. If the product is not
registered within 24 hours from when the button is pressed, the product will disconnect from the AVHS service.
32
Loading ...
Loading ...
Loading ...