Loading ...
Loading ...
Loading ...
ii900/ii910
Mode d’emploi
18
Firmware Update
Firmware updates are available for the Imager. Connect the
Imager to Fluke Connect Desktop to find the most current
firmware version.
To update with Fluke Connect Desktop:
1. Use the provided USB cable to connect the Imager to a PC
with the current version of Fluke Connect Desktop software
installed.
Fluke Connect Desktop software detects the connected
Imager, checks the firmware version, and updates the Imager
if a newer firmware version is available.
Fluke Connect Desktop requires an Internet connection to
download a new firmware version.
The Imager shows a popup message to confirm the update.
2. Tap YES to confirm and start the firmware update.
The Imager shows a popup message to restart the Imager.
3. Tap YES to restart the Imager.
To update with a .swu file:
1. Download the firmware update (.swu file) from the website to
a PC.
2. Use the provided USB cable to connect the Imager to the PC
with the new firmware update file.
A USB drive is added to the list of drives on your PC.
3. Copy the firmware update file (.swu) from the PC to the root
folder (/User Data/) of the added USB drive.
4. When the file copy is complete, safely remove the USB cable
from your PC.
The Imager shows a popup message to inform you that a
firmware update is found.
5. Tap YES to confirm and start the firmware update.
The Imager shows a popup message to restart the Imager.
6. Tap YES to restart the Imager.
Maintenance
The Imager does not require routine maintenance.
W Caution
The optical surfaces of the lens are equipped with
high-quality optical layers. Avoid any contact with
these surfaces and protect these surfaces against
dirt and damage.
How to Clean the Case
Clean the case with a clean, damp cloth. Do not use abrasives,
isopropyl alcohol, or solvents to clean the case or lens/window.
Acoustic Sensor Care
W Caution
The Imager has highly-sensitive acoustic sensors.
Do not expose the sensors to water or fluids,
dust, and other contaminates. Accumulation of
these in the sensor will affect the performance.
Always keep the Acoustic Sensor protected with the provided
cover when the Imager is not in use. Avoid grease or liquids on the
microphones. If the microphones are dirty or clogged, carefully
clean with low air pressure from a compressed air duster at 25 cm
to 30 cm (10 in to 12 in) distance. Avoid too much air pressure.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com
Loading ...