Loading ...
Loading ...
Loading ...
Acoustic Imager
Menus
15
Date & Time
• set date and format
• set time and format
Display
• turn on or turn off the display logo
Localization
• select language
• set decimal separator to point or comma
• set units of measurement
Factory Settings
• Startup Profile, see Profiles
• Reset to Factory Defaults
• Clear User Data (clear all images, videos, and other user
data)
Operating Conditions
• Set LeakQ Operating Conditions
1. Input the data relevant to your system and operating
conditions.
2. Select the LeakQ metrics (rate/costs or LeakQ scale) to
display.
• Set PDQ Mode network operating frequency (ii910)
1
. Se
lect your network operating Frequency.
2. Select the PDQ indicators to display: Discharge Type,
PD Count, Real time PRPD Plot.
Imager Info
• firmware version
• hardware version
• device registration
Use a mobile phone to scan the QR code and register your
device to receive important product updates. The serial
number and model number are automatically found during the
registration process.
Test Microphones
• verify the correct operation of the microphones
Save Diagnostic Information
• use at request of Fluke Customer Service to save diagnostic
information
Note
The diagnostic info file is saved in the Imager memory
at /User Data/DiagnosticInfo/.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct
.com
Loading ...
Loading ...
Loading ...