Loading ...
Loading ...
Loading ...
Iris
When the image is too dark, click the button
to enlarge the iris.
When the image is too bright, click the
button to stop down the iris.
10.2 Set Preset
A preset is a predeî´ªned image position. For the deî´ªned preset, you can call the preset No.
to view the position.
Steps
1.
Click to show the setting panel, and click .
2.
Use the PTZ control buttons to move the lens to the desired position.
3.
Select a preset number from the preset list, and click to î´ªnish the setting.
Note
Some presets are predeî´ªned with special command. You can only call them but not
conî´ªgure them.
4.
Repeat the steps above to set multiple presets.
Click the button to call the preset.
Click the button to delete the preset.
Note
You can delete all presets in Conî´ªguration > PTZ > Clear Conî´ªg . Click Clear All Presets,
and click Save.
What to do next
Go to Conî´ªguration > PTZ > Basic Settings to set preset freezing and preset speed.
After enabling preset freezing, the live image switches directly from one preset to another,
without showing the areas between these two scenes. It also guarantees the masked area
will not be seen when the device is moving.
10.2.1 Special Presets
You can call the following presets with special demands to enable corresponding
functions.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
52
Loading ...
Loading ...
Loading ...