Loading ...
Loading ...
Loading ...
Select two areas and set the comparison rule, and set the temperature difference
threshold. The device alarms when the temperature difference meets the setting
value.
5.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
6.
Optional: Shield certain area from being detected. Refer to for detailed settings.
7.
Optional: Set the offsite pre-alarm/alarm specially during off-hours when there are less
causes of false alarms. You can set the lower alarm temperature to improve the
efî´ªciency of quick alarm.
Note
The function varies according to different camera models.
1)Click .
2)Check Enable Offsite.
3)Set the offsite pre-alarm/alarm and follow step 4~5 to adjust the pre-alarm/alarm
temperature and arming schedule during working hours.
Note
The same parameters and linkage method apply to the two kinds of pre-alarm/alarm,
only the threshold temperature and arming schedule vary.
Offsite Pre-Alarm Temperature
When the temperature of target exceeds the Offsite Pre-Alarm Temperature during
the Offsite Arming Schedule, and this status lasts not shorter than the Filtering Time,
the pre-alarm is triggered.
Offsite Alarm Temperature
When the temperature of target exceeds the Offsite Alarm Temperature during the
Offsite Arming Schedule, and this status lasts not shorter than the Filtering Time, the
alarm is triggered.
Offsite Arming Schedule
Click and drag the time bar to select the arming off-hours for offsite pre-alarm and
alarm.
8.
Click Save.
Click Live View, and select thermal channel to view the temperature and rules
information on live view.
Point Thermography
Conî´ªgure the temperature measurement rule and click any point in live view to monitor the
temperature.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
12
Loading ...
Loading ...
Loading ...