Loading ...
Loading ...
Loading ...
Pre-Alarm Output and Alarm Output
Check Pre-Alarm Output and Alarm Output to link the pre-alarm or alarm with the
connected alarm device.
5.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
6.
Click Save.
The maximum and minimum temperature will be displayed on the live view.
Note
Go to Image > VCA Rules Display to adjust the font size and the temperature color of
normal, alarm and pre-alarm.
3.3.3 Set Expert Mode
Select the temperature measurement rules from Point, Line, or Area and conî´ªgure
parameters, the device alarms if the alarm rules are met.
Steps
1.
Go to Conî´ªguration > Temperature Measurement > Basic Settings , check Enable
Temperature Measurement.
2.
Refer to
Set Thermography Parameters
to set the parameters.
3.
Go to Conî´ªguration > Temperature Measurement > Advanced Settings , select Expert.
4.
Refer to
Set Preset
to set a preset.
5.
Select and enable the temperature measurement rules. Please refer to
Set
Thermography Rule
for setting the rule.
6.
Optional: Click Area's Temperature Comparison to set the alarm rules and the
temperature.
7.
Refer to
Set Arming Schedule
for setting scheduled time. Refer to
Linkage Method
Settings
for setting linkage method.
8.
Click Save.
The maximum temperature and thermography rules will be displayed on the live view.
Note
Go to Image > VCA Rules Display to adjust the font size and the temperature color of
normal, alarm and pre-alarm.
9.
Optional: Call the preset and check if the rules are efî´ªcient.
10.
Enable the scan function of device, such as linear scan to monitor the scene.
3.3.4 Set Thermography Rule
Steps
1.
Customize the rule name.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
10
Loading ...
Loading ...
Loading ...