Loading ...
Loading ...
Loading ...
Fire source detection can be applied to indoor and outdoor monitoring with a large
detection radius. To achieve the best monitoring effect, please set the installation place as
requirements below.
●
The installation place should be the highest position within the detection area. The lens
should not be covered during movement to detect the maximum area.
●
It is better to choose the installation place with convenient trafc, well-equipped power
and internet facilities (e.g., communication tower, watchtower and high-rise roof).
4.3 Detection Mode and Application Scene
Fire and Smoke Detection Mode
Fire or Smoke
The system alarms when device is either triggered by re source detection or smoke
detection.
Fire and Smoke
The system holds when device is triggered by re source detection or smoke detection.
When target is detected by both rules, the system sends two alarms, otherwise, the
system sends single alarm.
Double Conrm
The system alarms when device is both triggered by re source detection and smoke
detection.
Specied Fire Source
The system alarms when device is triggered by re source detection.
Specied Smoke
The system alarms when device is triggered by smoke.
Application Scene
In Application Scene, Short Distance and Long Distance are selectable. Select the scene
according to the actual distance.
4.4 Set the Presets
Please set the presets according to steps below to improve the accuracy of re detection.
Steps
1.
If the presets located in different areas, you can set 6 presets in two areas as the
example showed below.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
17
Loading ...
Loading ...
Loading ...