Loading ...
Loading ...
Loading ...
Steps
1.
Go to Conî´ªguration > Network > Advanced Settings > HTTPS .
2.
Check Enable .
3.
Optional: Check HTTPS Browsing to access the device only via HTTPS protocol.
4.
Click Delete to recreate and install certiî´ªcate.
Create and install self-signed certiî´ªcate Refer to
Create certiî´ªcate request and install certiî´ªcate Refer to
5.
Click Save.
15.16.8 Set QoS
QoS (Quality of Service) can help improve the network delay and network congestion by
setting the priority of data sending.
Note
QoS needs support from network device such as router and switch.
Steps
1.
Go to Conî´ªguration > Network > Advanced Conî´ªguration > QoS .
2.
Set Video/Audio DSCP, Alarm DSCP and Management DSCP.
Note
Network can identify the priority of data transmission. The bigger the DSCP value is, the
higher the priority is. You need to set the same value in router while conî´ªguration.
3.
Click Save.
15.16.9 Set IEEE 802.1X
IEEE 802.1x is a port-based network access control. It enhances the security level of the
LAN/WLAN. When devices connect to the network with IEEE 802.1x standard, the
authentication is needed.
Go to Conî´ªguration > Network > Advanced Settings > 802.1X , and enable the function.
Set Protocol and EAPOL Version according to router information.
Protocol
EAP-TLS and EAP-MD5 are selectable
EAP-MD5
If you use EAP-MD5, the authentication server must be conî´ªgured. Register a user
name and password for 802.1X in the server in advance. Input the user name and
password for authentication.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
117
Loading ...
Loading ...
Loading ...