Loading ...
Loading ...
Loading ...
Note
●
Pan and tilt manual control is not recommended in linkage tracking, because it will
interrupt the process.
●
The camera might not capture and upload automatically if the focusing/zooming
value isn't set properly.
7.
Click Save.
10.16.2 Set Zooming Ratio
Set the automatic zooming ratio in different object distance ranges to view the moving
target in proper image size during the tracking process.
Steps
1.
Go to Smart Tracking > Zooming Ratio .
2.
Click Get Recommended Value. Input the detection information and click OK to get one
recommended zooming ratio.
3.
Click Manual Add to add more zooming ratios in different object distance ranges. Up to
20 ratios are supported.
4.
Optional: Select the zooming ratio and click Delete to delete.
5.
Click Save.
10.16.3 Set Object Distance Calibration
Set and calibrate the automatic zooming ratio and focusing value in specic object
distance to get better image quality in scenes of darkness and low temperature difference.
Before You Start
You should complete the tracking zooming ratio conguration before.
Steps
1.
Go to Smart Tracking > Object Distance Calibration .
2.
Select External Application or PTZ Calculation as the way to obtain the detected object
distance in tracking.
3.
Aim the device at the target that meets the distance requirements. Adjust the zooming
ratio to the maximum with the PTZ control panel, and adjust the focus until the target is
clear enough.
4.
Calibrate the value.
1)Click Add to add one set of calibration.
2)Enter the actual value of the object distance.
3)Click Search to refresh the focusing, zooming and temperature value.
4)Click Calibration to complete a set of calibration.
5.
Click View Location to quickly view the saved image position.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
64
Loading ...
Loading ...
Loading ...