Loading ...
Loading ...
Loading ...
6.2 Set VCA Parameters
Steps
1.
Go to Conî´ªguration > Local .
Rules
Enable it to display rules information on live view.
Display Rules Info. on Capture
Select Yes to display rules information on the capture.
2.
Go to Conî´ªguration > VCA .
3.
Select the camera channel.
4.
Go to Basic Settings to conî´ªgure VCA parameters for the channel.
Display VCA Info. on Stream
Select to display target info and rule on stream, the information will be added to the
video stream, and the overlay will be displayed if you get live view or play back by the
VS Player.
Display Target Info. on Alarm Picture
Select to display the target information on the alarm picture.
Display Rule Info. on Alarm Picture
Select to display the rule information on the alarm picture.
Snapshot Settings
Select to upload the picture to the surveillance center when the VCA alarm occurs.
You can also set the quality of the picture.
5.
Click Save.
6.3 Conî´ªgure the Perimeter Protection
This section is the detailed instruction of conî´ªguring the perimeter protection rules.
Steps
1.
Go to Conî´ªguration > VCA , and select a camera channel to start conî´ªguration.
2.
Refer to
Set Detection Scenes and Tracking
for detection scene and tracking settings.
3.
Refer to
Set Rules
to set the scene rules.
4.
Refer to
Set the Scene Auto-Switch
for setting scene patrol.
5.
Go to Conî´ªguration > VCA > Camera 02 > Basic Settings , enable Intelligent Analysis.
6.
Click Save.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
31
Loading ...
Loading ...
Loading ...