Loading ...
Loading ...
Loading ...
6.3.1 Set Detection Scenes and Tracking
Multiple detection scenes are supported for both channels. You can create scenes and set
the tracking parameters for better target monitoring performance.
Steps
1.
Go to Conî´ªguration > VCA , and select a camera channel.
2.
Click Scene Conî´ªguration and New Scene to create one or more scenes.
3.
Select a numbered scene from the navigation bar on the left and enter a Scene Name.
Note
If you want to show the name on the image, check Display Scene Name.
4.
Select the type of the scene.
Note
The conî´ªgured rules in current scene will be cleared if you modify the type.
5.
Check Track to enable the target tracking function for the scene.
6.
Optional: Check Limited Tracking and set the auto tracking range.
The camera channel tracks a target only within the set auto tracking range.
1)Control the PTZ buttons to a desired scene and click
Set Up Limit to save the position
as the scene's upper boundary.
2)Repeat to set the left, right and lower boundaries of the scene.
7.
Set other tracking parameters.
Tracking Duration
Set the duration of tracking. If the value is selected as 0, the tracking duration will not
be limited.
Zooming Ratio
It is the zoomed-in level when the camera channel is tracking a target.
Go to Conî´ªguration > VCA > Zooming Ratio , select a scene from the drop-down list,
and control the zoom in/out buttons to get a desired zooming level, and save the
settings.
Post-tracking
Set the duration of automatic tracking of the target after it stops.
Go to Conî´ªguration > VCA > Advanced Conî´ªguration , and set parameter.
8.
Click Save.
6.3.2 Set Rules
The device can detect whether there is any target breaking the VCA rules. The optical
camera will track the target or the device will alarm when the VCA rule is triggered.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
32
Loading ...
Loading ...
Loading ...