Loading ...
Loading ...
Loading ...
4.
Click Save.
15.15 Set Visible Light Parameters
When the FOVs (Field of View) of the optical channel and thermal channel are not the
same, adjust the visible light optical axis to make sure the FOVs in the two channels are
the same.
Steps
1.
Go to Conguration > System > Maintenance > System Service .
2.
Select Visible Light Optical Axis Adjustment from the drop-down list.
3.
Check Enable Visible Light Optical Axis Adjustment.
4.
Adjust the optical zoom ratio to the maximum value via PTZ control panel.
5.
Click the direction buttons to adjust the position of the visible light optical axis.
6.
Adjust the sensitivity. The higher the value is, the faster the cursor moves.
7.
Click Save when the FOVs of the optical channel and thermal channel are the same.
Note
●
If the FOVs of the optical channel and thermal channel are not the same, functions
such as reect light lter and smoke auxiliary detection may be affected.
●
Please adjust the visible light optical axis under professional assistance.
15.16 Security
You can improve system security by setting security parameters.
15.16.1 Authentication
You can improve network access security by setting RTSP and WEB authentication.
Go to Conguration > System > Security > Authentication to choose authentication
protocol and method according to your needs.
RTSP Authentication
Digest and digest/basic are supported, which means authentication information is
needed when RTSP request is sent to the device. If you select digest/basic, it means the
device supports digest or basic authentication. If you select digest, the device only
supports digest authentication.
WEB Authentication
Digest and digest/basic are supported, which means authentication information is
needed when WEB request is sent to the device. If you select digest/basic, it means the
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
111
Loading ...
Loading ...
Loading ...