Loading ...
Loading ...
Loading ...
14.9 Set ISUP
When the device is registered on ISUP platform (formerly called Ehome), you can visit and
manage the device, transmit data, and forward alarm information over public network.
Steps
1.
Go to Conî´ªguration > Network > Advanced Settings > Platform Access .
2.
Select ISUP as the platform access mode.
3.
Select Enable.
4.
Select a protocol version and input related parameters.
5.
Click Save.
Register status turns to Online when the function is correctly set.
14.10 Set Open Network Video Interface
If you need to access the device through Open Network Video Interface protocol, you can
conî´ªgure the user settings to enhance the network security.
Steps
1.
Go to Conî´ªguration > Network > Advanced Settings > Integration Protocol .
2.
Check Enable Open Network Video Interface.
3.
Click Add to conî´ªgure the Open Network Video Interface user.
Delete Delete the selected Open Network Video Interface user.
Modify Modify the selected Open Network Video Interface user.
4.
Click Save.
5.
Optional: Repeat the steps above to add more Open Network Video Interface users.
14.11 Set Alarm Server
The device can send alarms to destination IP address or host name through HTTP, HTTPS,
or ISUP protocol. The destination IP address or host name should support HTTP, HTTP, or
ISUP data transmission.
Steps
1.
Go to Conî´ªguration > Network > Advanced Settings > Alarm Server .
2.
Enter Destination IP or Host Name, URL, and Port.
3.
Select Protocol.
Note
HTTP, HTTPS, and ISUP are selectable. It is recommended to use HTTPS, as it encrypts
the data transmission during communication.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
104
Loading ...
Loading ...
Loading ...