Loading ...
Loading ...
Loading ...
Figure 4-2 Set the Presets for re detection
2.
Divide the scan area into three parts and set a preset every 120°. The black numbers are
presets, and the red numbers are scan areas.
3.
Set the presets according to the sequence of patrol path: 1->2->3->1->4->5->6->4.
Note
●
When set the presets, you should adjust the zoom ratio to view the image of both
optical channel and thermal channel clearly.
●
The recommended zoom ratio of optical channel and patrol speed shows in the table
below.
Thermal & Optical Bi-spectrum PTZ Network Camera User Manual
18
Loading ...
Loading ...
Loading ...