Loading ...
Loading ...
Loading ...
G Tide Level
In the Tide Graph Mode, the mode hand
points to the current tide level in the
specified port.
H Alarm on/off setting
In the Alarm Mode, the second hand
indicates if the alarm is enabled or
disabled.
[ON]: Alarm enabled
[OFF]: Alarm disabled
I Last receive result, phone connection
status, Airplane Mode setting
The second hand points to the letter that
indicates the result of the last time
adjustment operation that was performed
by receipt of a time calibration signal when
the watch is not paired with a phone.
[Y(YES)]: Auto time adjustment
successful
[N(NO)]: Auto time adjustment failed
The second hand indicates the
connection status between the watch and
a phone when the watch is paired with a
phone.
[Y(YES)]: The watch is connected to your
phone.
[N(NO)]: The watch is not connected to
your phone.
The second hand indicates if auto time
adjustment (Airplane Mode) is enabled or
disabled.
[Y(YES)]: Auto time adjustment enabled
(Airplane Mode disabled)
[N(NO)]: Auto time adjustment disabled
(Airplane Model enabled)
J [C]
When connection with the phone starts,
the second hand will point to [C].
K [RC]
The second hand points to [RC] while time
calibration signal reception is in progress.
Navigating Between Modes
Press (C) to cycle between modes.
●
In any mode*, hold down (C) for at least one
second to enter the Calendar Mode.
●
In any mode*, hold down (C) for at least two
seconds to enter the Dive Mode.
* Besides Dive Mode.
CC
C
C
C
C
C
30
Dive Mode
(At least 2 seconds) (At least 2 seconds)
Tide Graph Mode
Timer Mode
Alarm Mode
Stopwatch Mode
Calendar Mode
Mode hand
●
Connecting with a Phone
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
D
30
30
After connectionBefore connection
Mode Overview
●
Calendar Mode
The main hour, minute, and second hands
indicate the current time.
The small hour and minute hands show
another time (Dual Time).
30
④⑤ ⑥
③
②①
Last Time
Adjustment Result
Hand Shift
A Current location time (24-hour time)
One revolution every 24 hours.
B Day of the week at current location
C Dual Time hour
D Dual Time minute
E Dual Time hour (24-hour hand)
The hand points to the A-side for a.m.
times, and to the P-side for p.m. times.
F Current location date
Time Adjustment Using a Time Calibration
Signal
Hold down (D) for at least 0.5 seconds until the
second hand points to [RC].
●
A manual time calibration signal receive
operation cannot be performed while the
watch is paired with a phone.
Swapping the Current Location Time and
Dual Time
Hold down (B) for at least three seconds.
Connecting with a Paired Phone to Adjust
the Watch’s Time
Hold down (D) for at least 0.5 seconds until the
second hand points to [C].
Searching for a Paired Phone
Hold down (D) for at least five seconds.
Watch Operation Guide 5702
6
Loading ...
Loading ...
Loading ...