Loading ...
Loading ...
Loading ...
Auto Time Adjustment by
Bluetooth Connection (Time
Adjustment)
Q1
When does the watch adjust its time?
Your watch can connect with a paired phone
to adjust its time setting. Auto time adjustment
is performed at the times described below.
●
After your phone’s time zone or summer
time setting is changed
●
After 24 hours or more have passed since
the last time adjustment using Bluetooth
connection
●
After 24 hours or more have passed since
city swapping using CASIO WATCHES or
watch operation
●
After 24 hours or more have passed since
the last home city change or time
adjustment using watch operation
Q2
Auto time setting is not correct.
Is there a Bluetooth connection between
the watch and your phone?
To preserve battery power, the watch will
automatically terminate Bluetooth
connection with your phone temporarily if
it detects the connection has been unused
for approximately one hour. Auto Time
Adjustment is disabled while there is no
connection. To reconnect, press any
watch button or angle the watch towards
your face.
Have 24 hours or more passed since the
last time adjustment using Bluetooth
connection?
Time adjustment using Bluetooth
connection is performed once every 24
hours. Auto time adjustment will be
performed when 24 hours or more have
elapsed since the last time adjustment
operation.
Have 24 hours or more has passed since
the last manual time adjustment, city
change, or city swapping operation?
Auto time adjustment is not performed for
24 hours after a manual time adjustment,
city change, or city swapping operation.
Auto time adjustment will resume after 24
hours or more have elapsed after either of
the above operations is performed.
Is the watch’s Airplane Mode enabled?
Connection with your phone is not
possible while the watch’s Airplane Mode
is enabled. To connect with your phone,
disable the Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Q3
Even if I hold down (D) for at least 0.5
seconds, the watch does not sync its
time setting with my phone.
Connection with your phone is not possible
while the watch’s Airplane Mode is enabled.
To connect with your phone, disable the
Airplane Mode.
l
Using the Watch in a Medical Facility or
Aircraft
Q4
Time is not displayed correctly.
If your phone is unable to receive a signal
because you are outside its service range or
for some other reason, the watch may not be
able to display the correct time. If this
happens, connect the phone to its network
and then adjust the time setting.
Q5
Time signal reception is not
performed while watch is connected
with a phone.
The watch does not receive a time signal for
time correction while it is connected with a
phone. However, time signal auto receive is
performed if there has been no auto time
adjustment based on connection between the
watch and phone for more than one day.
Diving Function
Q1
I can’t enter the Dive Mode.
The watch will not enter the Dive Mode while
its charge is low or dead. Charge the watch
before using it for diving.
Q2
The watch enters the Calendar Mode
when it switches from dive time
measurement to surface interval
measurement.
If the watch charge becomes low while it is in
the Dive Mode, it will not be able to perform
surface interval measurement. Charge the
watch before using it for diving.
Tide Level
Q1
Tide level information is not
displayed when I enter the Tide
Graph Mode.
To check a tide level, use CASIO WATCHES
to specify a port.
Alarm
Q1
The alarm does not sound.
Is the watch’s battery charged?
Keep the watch exposed to light until it
recharges sufficiently.
l
Charging
The crown is pulled out.
The alarm will not sound while the crown
is pulled out. Push the crown back in to its
normal position.
Is the alarm enabled?
Enable the alarm.
l
Configuring Alarm Settings
Hand Movement and
Indications
Q1
I don’t know what mode the watch is
in.
You can determine the current mode by
checking the mode hand position. Use (C) to
navigate between modes.
l
Navigating Between Modes
30
Q2
The second hand is jumping at two-
second intervals.
Battery power is low. Keep the watch exposed
to light until it recharges sufficiently.
l
Charging
Q3
All hands are stopped and buttons do
not work.
The battery is dead. Keep the watch exposed
to light until it recharges sufficiently.
l
Charging
Watch Operation Guide 5702
31
Loading ...