01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
01 02 03 04 05 06 07 08
Choose a Location
The camera can be placed on a table or shelf, or can be
installed on a wall or ceiling. Select a location and height
that achieves your desired view and is within reach of a
power outlet.
Note: Keep the camera at least 0.7ft/0.2m away from any
objects or walls to avoid infrared reflection, which may
impact night vision performance.
Camera Field of View
On a Table or Shelf
QUICK START GUIDE
Indoor Cam S350
AT A GLANCE
①
④
⑤
⑥
SYNC
⑦
⑧
③
②
①
Wide-Angle Lens
⑤
Status LED
②
Telephoto Lens
⑥
Speaker
③
Microphone
⑦
SYNC Button
④
microSD Slot
Insert a microSD card*
(not included) to store recordings
⑧
Power Input
*Use at least a Class 10 microSD card with a maximum of 128 GB.
LED LIGHT GUIDE
Solid Violet System is initializing
Solid Blue
Working normally or
ready for setup
Blinking Red
Not connected to the
internet
Solid Red
Recording or the live
stream is being viewed
Flashing Blue
and Red
Firmware upgrade in
progress
Note: Keep the camera
connected to a power source
SETTING UP THE SYSTEM
1. Download and install the eufy Security app, and sign
up for an account.
2. Connect the camera to a power source and wait until
the status LED turns solid blue.
3. Tap
+
in the app and follow the in-app instructions to
add your camera.
My Devices
INSTALLING YOUR
CAMERA
Telephoto Lens Focusing Distance
To ensure an optimal zoom experience from the
telephoto lens, place the camera at least 8 ft (2.5 m) away
from the area to be monitored.
On the Wall
On the Ceiling
2 ft
3.3 ft
2.6 ft
8ft
8 ft
9 ft
5.6 ft
Telephoto Lens in Focus
Telephoto Field of View
Install on a Wall or Ceiling
Note: Disconnect
the camera from the
power outlet before
mounting.
1. Mark the screw positions on the wall or ceiling with the
positioning sticker and drill a pilot hole.
WHAT’S INCLUDED
You may need a screwdriver, drill, and ladder.
Quick Start Guide
Screw PackPositioning StickerWall Mount
Indoor Cam S350
USB Cable
Power Adapter
2.6 ft
10 ft
6 ft
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
09 10 11 12 13 14 15 16
2. Hold the mounting plate on the wall and make sure
the "UP" arrow is pointing up. Secure the mounting plate
to the wall or ceiling with the screws.
On the Wall
On the Ceiling
3. Keep the camera disconnected from power. Connect
the USB-C Cable to the camera with the other end not
connected to a power source.
4. If mounting on a wall, place the cable into the cable
channel of the mounting plate.
* Skip this step for ceiling installation.
5. Slide the camera onto the mounting plate and make
sure it is attached securely.
On the Wall
On the Ceiling
SYNC
CUSTOMER SERVICE
12-month limited warranty
(US) +1 (800) 988-7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(
中国
) +86 400 0550 036
(
日本
) +81 03 4455 7823
(AU) +61 3 8331 4800
(Egypt) +20 8000000826
(UAE) +971 8000320817
(Kuwait) +965 22069086
(Saudi Arabia) +966 8008500030
(Middle East & Africa) +971 520750842
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road,
Mongkok, Kowloon, Hong Kong
@EufyOfficial @EufyOfficial @EufyOfficial
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security
Logo are trademarks of Anker Innovations Limited, registered in the United
States and other countries. All other trademarks are the property of their
respective owners.
51005003911 V01
SAFETY
The recommended temperature range for devices and accessories
is 0°C to 40°C (32°F to 104°F) .
Unless specifically indicated that it is safe to do so in the user guide
or instruction manual, do not use this device in an environment
that exceeds the recommended low or high temperature.
Unless specifically indicated that it is safe to do so in the user
guide or instruction manual, avoid exposing your device to direct
sunshine or excessively wet environments.
For pluggable equipment, the socket-outlet shall be easily
accessible.
Use only the adapter provided by the manufacturer. Using
unauthorized adapters may cause danger and violate the
authorized use of the device or the warranty article.
CHILD SAFETY
• THIS DEVICE IS NOT A TOY.
• Choking Hazard: The product contains (or comes with) small
parts, plastic elements, cables and parts that may cause choking
hazard. Keep your camera and its accessories out of the reach of
small children. Consult a physician immediately if small parts are
swallowed.
• Strangulation Hazard: Children get strangled in cords. Keep
cords out of the reach of children (more than 3ft/0.9m away).
NOTICE
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more
of the following measures: (1) Reorient or relocate the receiving
antenna. (2) Increase the separation between the equipment and
receiver. (3) Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected. (4) Consult
the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The device has been evaluated to meet general RF exposure
requirements. The device can be used in fixed/mobile exposure
condition. The min separation distance is 20 cm.
Notice: Shielded cables
All connections to other computing devices must be made using
shielded cables to maintain compliance with FCC regulations.
The following importer is the responsible party.
Company Name: POWER MOBILE LIFE, LLC
Address: 10900 NE 8TH ST, STE 501, BELLEVUE, WA 98004
Telephone: 1-800-988-7973
IC Statement
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada
applicables aux appareils radio exempts de licence. L'exploitation
est autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
IC RF Statement
When using the product, maintain a distance of 20cm from the
body to ensure compliance with RF exposure requirements.
Lors de l'utilisation du produit, maintenez une distance de 20
cm du corps afin de vous conformer aux exigences en matière
d'exposition RF.
Declaration of Conformity
This product complies with the radio interference
requirements of the European Community.
Hereby, Anker Innovations Limited declares that this device is in
compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. For the declaration of
conformity, visit the Web site: https://uk.eufylife.com/.
The following importer is the responsible party (contract for EU
matters):
Anker Innovations Deutschland GmbH I Georg-Muche-Strasse
3,80807 Munich, Germany
This product is designed and manufactured with high
quality materials and components, which can be recycled
and reused.
This symbol means the product must not be discarded
as household waste, and should be delivered to an
appropriate collection facility for recycling. Proper disposal
and recycling helps protect natural resources, human
health and the environment. For more information on
disposal and recycling of this product, contact your local
municipality, disposal service, or the shop where you
bought this product.
SYNC
Model:T8416
