Hikvision DS-7716NI-I4/16PB User Manual

Loading ...

6.5.6 Trigger Alarm Output

The alarm output can be triggered by the alarm input, moon detecon, video tampering

detecon, face detecon, line crossing detecon, and any all other events.

Steps

1. Go to Linkage Acon interface of the alarm detecon (e.g., moon detecon, face detecon,

line crossing detecon, intrusion detecon, etc.).

2. In Trigger Alarm Outputs area, select the alarm output (s) to trigger.

3. Go to System → Event → Normal Event → Alarm Output .

4. Select an alarm output item from the list.

Note

If the device has 8 alarm outputs, the Ctrl 12V power is controled by alarm output 9. Connect

posive pole to A of Ctrl 12V, and connect negave pole to B of Ctrl 12V. The power will be

turned on when the alarm output is triggered.

6.5.7 Congure Audio and Light Alarm Linkage

For certain network cameras, you can set the alarm linkage acon as audio alarm or light alarm.

Before You Start

●

Ensure your camera supports audio and light alarm linkage.

●

Ensure the audio output and volume are properly congured.

Steps

1. Go to the linkage acon interface of the alarm detecon (e.g., moon detecon).

2. Set Audio and Light Alarm Linkage as your desire.

3. Click Apply.

6.5.8 Congure PTZ Linkage

The system can trigger the PTZ acons (e.g., call preset/patrol/paern) when the alarm event, or

VCA detecon events occurs.

Before You Start

Make sure the connected PTZ or speed dome connected supports PTZ linkage.

Steps

1. Go to Linkage Acon interface of the alarm input or VCA detecon (e.g., face detecon, line

crossing detecon, intrusion detecon, etc.).

2. Select the PTZ Linkage.

3. Select the camera to perform the PTZ acons.

4. Select the preset/patrol/paern No. to call when the alarm events occur.

Network Video Recorder User Manual

Loading ...

Hikvision DS-7716NI-I4/16PB 16-ch 1.5U 16 PoE 4K NVR