Hikvision DS-7716NI-I4/16PB User Manual

Loading ...

Note

a. If there are parts of the screen (either within or outside the detecon area) that do not

need to be detected (such as an area where the light jumps from me to me or leaves

oen dri by and trigger false alarms, etc.), you can draw it as a shield region.

b. Click to start drawing, le click each me on the screen to determine a vertex, right click

to stop drawing. The inside of the drawn polygon is the shielded area. If you make a mistake,

you can click and redraw.

c. 8 shield regions are supported.

11. Click Save.

6.2.12 Loitering Detecon

Loitering detecon is used to detect whether a target stays within a specied area longer than the

set me and trigger alarm for linked acons.

Steps

1. Go to Smart Analysis → Smart Event Sengs → Other Events .

2. Select a camera.

3. Click Loitering Detecon.

Figure 6-9 Loitering Detecon

4. Check Enable Loitering Detecon.

5. Oponal: Check Save VCA Picture to save the captured loitering detecon pictures.

6. Set loitering detecon parameters.

1) Select Arming Area.

Network Video Recorder User Manual

Loading ...

Hikvision DS-7716NI-I4/16PB 16-ch 1.5U 16 PoE 4K NVR