Loading ...
Loading ...
Loading ...
39
SettInG oVen controLS
to set a self clean cycle:
If you are planning to use the oven directly after
a self clean cycle, remember to allow time for the
oven to cool down and the oven door to unlock.
This normally takes about one hour. A 3 hour self
clean cycle will actually take about 4 hours to com-
plete.
It is recommended to use a 2 hour self clean cycle
for light soils, a 3 hour cycle for average soils, and a
4 hour cycle for heavy soils.
to set the controls for a 3 hour self clean cycle
and shut o automatically:
Turn both the oVen mode knob to CLEAN. The
display will show a 3 hour time (normal clean) and
the – and + keys.
If a 3 hour clean is desired, the control will accept
the time within 3 seconds. However, the user may
select a 2 or 4 hour clean by using the – or + keys
to change to the desired clean time and then allow
the control to accept the change
Setting 2 hour clean
Oven ready for 3 hour clean
Setting 4 hour clean
Once the control accepts the clean time the
display will flash a reminder for the user to
REMOVE RACKS.
The REMOVE RACKS notification will flash for a
few seconds prompting the user to remove all oven
racks.
If the oven door is opened as this time the display
will show CLO to indicate that the door must be
closed before the clean cycle can begin.
If the door remains open for more than 3 minutes,
the clean function will be canceled
When the oven is set to run the clean cycle, the
motor door lock will begin locking the oven door.
Do not open the oven door while the lock motor is
running or when any locking indicators or displays
are showing. The oven door is completely locked in
about 15 seconds.
After self-clean, the oven may take about one hour
cool and unlock. A Hot message will display during
this period. After cooling, the DOOR lock icon will
flash and disappear indicating that the door has
unlocked and the oven may be used for normal
cooking.
Loading ...
Loading ...
Loading ...