Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/98765277-ds-2td4228t-7-s2/bg40.png)
Before You Start
Note
This funcon is only supported by certain models.
Finish seng the desired acons (Linear Scan and Patrol are available) and VCA funcons (Fire
Detecon is available). See Set Linear Scan , Set Patrol Scan , and Fire and Smoke Detecon for
conguraon instrucons.
Steps
1.
Go to Conguraon → PTZ → Combined Path .
2.
Select a channel.
3.
Select a path number from the drop-down list.
Up to 4 paths are available.
4.
Click Add, and set the acon type, acon No. and VCA type for the added acon.
Up to 10 acons can be added to one path.
You can click ON to manually call the path and OFF to stop it.
5.
Click Save.
What to do next
Set the combined path in park acon (see Set Park Acon ) or scheduled task (see Set Scheduled
Tasks ).
8.12 Set Device Posion
Before You Start
Go to Conguraon → PTZ → Basic Sengs → PTZ OSD to enable PT Status display.
Steps
1.
Go to the seng page: Conguraon → PTZ → Posion Sengs .
2.
Select a PT Mode.
Manual Use a direcon indicang device to determine the North at the device locaon, and
set the North for the device. For details, see
Set Manual Compass .
Auto For the device that has built-in e-compass, the compass can automacally tell the
north direcon for the device. For details, see
Set Auto Compass .
3.
Oponal: Check Display Posion Diagram to display the posion diagram on the live view.
4.
Set Vandal-proof alarm.
Aer enabling the funcon, the device triggers alarms once its posion changes because of
shock or vandalism.
Sensivity
The higher the value is, the easier the alarm will be triggered.
Upload Vandal-proof Alarm
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
49
Loading ...
Loading ...
Loading ...