Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/98765277-ds-2td4228t-7-s2/bg3c.png)
Steps
Note
This funcon is only supported by certain models.
1.
Click to show the PTZ control panel, and click .
2.
Select one paern scan path that needs to be set.
3.
Click to start recording paern scan.
4.
Click PTZ control buons as demands.
Note
Recording stops when the space for paern scan is 0%.
5.
Click to complete one paern scan path sengs.
6.
Click to call paern scan.
Stop paern scan.
Reset paern scan path.
Delete the selected paern scan.
Note
If you need to delete all the paern scans, go to Conguraon → PTZ → Clear Cong , and
check Clear All Paerns, and click Save.
8.5 Set Linear Scan
The device can perform auto scan in seng area for re source detecon.
Steps
1.
Go to Conguraon → PTZ → Linear Scan .
2.
Select the camera channel.
3.
Zoom in and zoom out the camera to the appropriate zoom rao, and click Save Rao.
Note
Click Enable Saved Rao to set the camera to the saved zoom rao.
4.
Check Enter Area Sengs.
5.
Set the le/right/up/down limits with the PTZ control panel, and click
to conrm sengs.
6.
Oponal: Click Clear to delete the saved scan area.
7.
Click Save.
8.
Click Call Linear Scan to start linear scan, and click Stop Linear Scan to stop linear scan.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
45
Loading ...
Loading ...
Loading ...