Hikvision DS-2TD4228T-7/S2 User Manual

Loading ...

Select Time Zone.

Click NTP.

Set Server Address, NTP Port and Interval.

Note

Server Address is NTP server IP address.

Click Test to test server connecon.

Click Save.

13.10.3 Set DST

If the region where the device is located adopts Daylight Saving Time (DST), you can set this

funcon.

Steps

Go to Conguraon → System → System Sengs → DST .

Check Enable DST.

Select Start Time, End Time and DST Bias.

Click Save.

13.11 Set RS-232

RS-232 can be used to debug device or access peripheral device. RS-232 can realize communicaon

between the device and computer or terminal when the communicaon distance is short.

Before You Start

Connect the device to computer or terminal with RS-232 cable.

Steps

Go to Conguraon → System → System Sengs → RS-232 .

Set RS-232 parameters to match the device with computer or terminal.

Click Save.

13.12 Set RS-485

RS-485 is used to connect the device to external device. You can use RS-485 to transmit the data

between the device and the computer or terminal when the communicaon distance is too long.

Before You Start

Connect the device and computer or terminal with RS-485 cable.

Steps

Go to Conguraon → System → System Sengs → RS-485 .

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228T-7/S2 Thermographic Thermal & Optical Bi-spectrum Network Speed Dome