Loading ...
Loading ...
Loading ...
2.
Check Enable Alarm Input Handling.
3.
Select Alarm Input NO. and Alarm Type from the dropdown list. Edit the Alarm Name.
4.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
5.
Click Copy to... to copy the sengs to other alarm input channels.
6.
Click Save.
6.4 Set Excepon Alarm
Excepon such as network disconnecon can trigger the device to take corresponding acon.
Steps
1.
Go to Conguraon → Event → Basic Event → Excepon .
2.
Select Excepon Type.
HDD Full The HDD storage is full.
HDD Error Error occurs in HDD.
Network Disconnected The device is oine.
IP Address Conicted The IP address of current device is same as that of other device in
the network.
Illegal Login Incorrect user name or password is entered.
Voltage Instable The power supply voltage is uctuang.
PT Locking The panning and lng movements are stuck.
3.
Refer to
Linkage Method Sengs for seng linkage method.
4.
Click Save.
6.5 Set Burning-Prevenon
This funcon is used to close the shuer to prevent the lens from high temperature damage.
Steps
1.
Go to Conguraon → Event → Basic Event → Burning-Prevenon .
2.
Check Enable.
3.
Select burning-prevenon mode.
Lens Movement
The lens move automacally to avoid high temperature damage.
4.
Set the protecon duraon and protecon delay.
5.
Click Save.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
34
Loading ...
Loading ...
Loading ...