Loading ...
Loading ...
Loading ...
Before You Start
You need to acvate the camera before enabling the service.
Steps
1.
Access the camera via web browser.
2.
Enter plaorm access conguraon interface. Conguraon → Network → Advanced Sengs
→ Plaorm Access
3.
Select Hik-Connect as the Plaorm Access Mode.
4.
Check Enable.
5.
Click and read "Terms of Service" and "Privacy Policy" in pop-up window.
6.
Create a vericaon code or change the old vericaon code for the camera.
Note
The vericaon code is required when you add the camera to Hik-Connect service.
7.
Save the sengs.
Enable Hik-Connect Service via SADP Soware
This part introduce how to enable Hik-Connect service via SADP soware of an acvated camera.
Steps
1.
Run SADP soware.
2.
Select a camera and enter Modify Network Parameters page.
3.
Check Enable Hik-Connect.
4.
Create a vericaon code or change the old vericaon code.
Note
The vericaon code is required when you add the camera to Hik-Connect service.
5.
Click and read "Terms of Service" and "Privacy Policy".
6.
Conrm the sengs.
12.8.2 Set Up Hik-Connect
Steps
1.
Get and install Hik-Connect applicaon by vising hps://www.hikmicro.com/en/ . Then go to
Support → Download Center → Soware to down load the applicaon.
2.
Start the applicaon and register for a Hik-Connect user account.
3.
Log in aer registraon.
Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual
85
Loading ...
Loading ...
Loading ...