Hikvision DS-2TD4228T-7/S2 User Manual

Loading ...

13.15.7 Set QoS

QoS (Quality of Service) can help improve the network delay and network congeson by seng

the priority of data sending.

Note

QoS needs support from network device such as router and switch.

Steps

Go to Conguraon → Network → Advanced Conguraon → QoS .

Set Video/Audio DSCP, Alarm DSCP and Management DSCP.

Note

Network can idenfy the priority of data transmission. The bigger the DSCP value is, the higher

the priority is. You need to set the same value in router while conguraon.

Click Save.

13.15.8 Set IEEE 802.1X

IEEE 802.1x is a port-based network access control. It enhances the security level of the LAN/

WLAN. When devices connect to the network with IEEE 802.1x standard, the authencaon is

needed.

Go to Conguraon → Network → Advanced Sengs → 802.1X , and enable the funcon.

Set Protocol and EAPOL Version according to router informaon.

Protocol

EAP-TLS and EAP-MD5 are selectable

EAP-MD5

If you use EAP-MD5, the authencaon server must be congured. Register a user name and

password for 802.1X in the server in advance. Input the user name and password for

authencaon.

EAP-TLS

If you use EAP-TLS, input Idenfy, Private Key Password, and upload CA Cercate, User

Cercate and Private Key.

EAPOL Version

The EAPOL version must be idencal with that of the router or the switch.

Thermal & Opcal Bi-spectrum PTZ Network Camera User Manual

Loading ...

Hikvision DS-2TD4228T-7/S2 Thermographic Thermal & Optical Bi-spectrum Network Speed Dome