Hikvision DS-2DE5425IWG-K/4G User Manual

Loading ...

Custom a name for the alarm output.

Click Manual Alarm to enable manual alarm output.

Oponal: Click Clear Alarm to disable manual alarm output.

8.2.2 FTP/NAS/Memory Card Uploading

If you have enabled and congured the FTP/NAS/memory card uploading, the device sends the

alarm informaon to the FTP server, network aached storage and memory card when an alarm is

triggered.

Refer to Set FTP to set the FTP server.

Refer to Set NAS for NAS conguraon.

Refer to Set New or Unencrypted Memory Card for memory card storage conguraon.

8.2.3 Send Email

Check Send Email, and the device sends an email to the designated addresses with alarm

informaon when an alarm event is detected.

For email sengs, refer to Set Email .

Set Email

When the email is congured and Send Email is enabled as a linkage method, the device sends an

email nocaon to all designated receivers if an alarm event is detected.

Before You Start

Set the DNS server before using the Email funcon. Go to Conguraon → Network → Basic

Sengs → TCP/IP for DNS sengs.

Steps

Go to email sengs page: Conguraon → Network → Advanced Sengs → Email .

Set email parameters.

1) Input the sender's email informaon, including the Sender's Address, SMTP Server, and

SMTP Port.

2) Oponal: If your email server requires authencaon, check Authencaon and input your

user name and password to log in to the server.

3) Set the E-mail Encrypon.

●

When you select SSL or TLS, and disable STARTTLS, emails are sent aer encrypted by SSL or

TLS. The SMTP port should be set as 465.

●

When you select SSL or TLS and Enable STARTTLS, emails are sent aer encrypted by

STARTTLS, and the SMTP port should be set as 25.

Network Speed Dome User Manual

Loading ...

Hikvision DS-2DE5425IWG-K/4G 4MP 25X Pro Solar-powered Security PTZ Camera Kit