Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/52566660-ds-2de5425iwg-k-4g/bg3e.png)
Note
The funcon is only supported by certain models. The actual funcon varies according to
dierent models.
7.1.5 Set Alarm Input
Alarm signal from the external device triggers the corresponding acons of the current device.
Before You Start
Note
This funcon is only supported by certain models.
Make sure the external alarm device is connected. See Quick Start Guide for cable connecon.
Steps
1.
Go to Conguraon → Event → Event and Detecon → Alarm Input .
2.
Select an Alarm Input NO. and click to set alarm input.
3.
Select Alarm Type from the dropdown list. Edit the Alarm Name.
4.
Check Enable Alarm Input Handling.
5.
Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for
seng linkage method.
6.
Click Copy to... to copy the sengs to other alarm input channels.
7.
Click Save.
7.2 Smart Event
Note
●
For certain device models, you need to enable the smart event funcon on VCA page rst to
show the funcon conguraon page.
●
The funcon varies according to dierent models.
7.2.1 General Sengs
Set the general parameters which are related to the smart applicaons.
Go to VCA → Set Applicaon → General Sengs to set the following parameters.
FTP
For FTP sengs, refer to
Set FTP .
Network Speed Dome User Manual
50
Loading ...
Loading ...
Loading ...