Loading ...
Loading ...
Loading ...
Chapter 12 Serial Bus Trigger and Decode (Optional)
317
Trigger mode
Open the trigger configuration menu and select the appropriate trigger type; when choosing UART bus trigger,
the trigger type, trigger relationship and trigger data need to be set, as shown in Figure 12-6:
Figure 12-6 Trigger Setting Menu
After selecting the trigger data, use the pop-up virtual keyboard to modify it, enter the value, and click “Enter”
on the virtual soft keyboard to complete the setting.
UART trigger configuration menu description:
a) Start bit — trigger at the start bit of the measured signal;
Loading ...
Loading ...
Loading ...