Loading ...
Loading ...
Loading ...
Chapter 5 Vertical System
167
5.4.2 Set Bandwidth Limit
Open the channel menu, find the “Bandwidth” selection box in the channel menu, set bandwidth limit, high-pass
filtering and low-pass filtering as needed.
Full Bandwidth: Allows signals of all frequencies to pass.
Low pass: Only signals below the currently set frequency upper limit are allowed to pass. (with the settings same
as High Pass)
Low-pass filtering can be set within the frequency range of 30kHz-100MHz.
The difference in bandwidth limitation can be visualized by the waveform. The full bandwidth is shown in Figure
5-9, the low pass is shown in Figure 5-10.
Loading ...
Loading ...
Loading ...