Simpson Cleaning TRS33555131E Mobile Trailer 49-State

User Manual - Page 46

For TRS33555131E.

PDF File Manual, 160 pages, Read Online | Download pdf file

TRS33555131E photo
Loading ...
Loading ...
Loading ...
Page 44
Before each use, check engine for loose or damaged parts, signs of oil or fuel leaks, and/or
any other condition that may a󰀨ect proper operation. Always keep all safety guards in place
and in proper working order. Repair or replace all damaged or defective parts immediately.
For safety reasons, the manufacturer recommends all engine service and repairs (including
emission control devices and systems) be performed by an authorized service center.
All warranty replacements or repairs must be performed by an authorized distribution or
service center. To nd an authorized service center near you, obtain information about how
to make a warranty claim, or to make arrangements for authorized warranty repairs, please
call 1-877-362-4271 or email [email protected].
For all other information on engine maintenance, refer to the engine manual.
Engine Maintenance
STORAGE AND TRANSPORTATION
Storing for Two Months or Less
1. Fill fuel tank per the ENGINE PREPARATION section of this manual then add a fuel
stabilizer per the manufacturers recommendations. NOTE: Using a fuel stabilizer (sold
separately) when storing gasoline may help prevent problems related to alcohol blended
fuels in outdoor power equipment engines. Always follow the instructions provided by the
fuel stabilizer manufacturer to mix and use correctly.
7. Using the three-way valve under the water tank, drain the tank.
2. Make sure the tank has enough water to run the pump for about ten minutes.
4. Start the engine per the STARTING section of this manual and run it for ten (10) minutes
to allow the stabilized fuel to circulate through the entire fuel system. Be sure to squeeze the
trigger to keep water owing through the pump and spray gun to avoid overheating.
5.
Turn the engine switch to the OFF position.
9. Store the trailer in a clean, dry area out of direct sunlight.
6. Squeeze the spray gun trigger to relieve the pressure in the hose and pump then drain
the high pressure hose.
8.
Allow the engine to cool completely.
3. Complete the steps in the OPERATING CHECKLIST and CONNECTING SPRAY GUN
sections of this manual
Loading ...
Loading ...
Loading ...