Loading ...
Loading ...
Loading ...
Turn on the water supply and run for 5
seconds to purge any debris from the
supply hose. Then, turn o the water
supply and thread the water supply hose
into the tank ller hose.
2.
Turn on the water supply. Allow the tank to ll to the FULL level. 3.
Rotate the tank valve to the CLOSED position. 1.
Page 16
FILLING THE WATER TANK
The water used in the tank should be clean, potable water. Do not use recycled, gray or
pond water. These types of water will quickly clog the water lter and may lead to pump
damage. Never use any types of water cleaners / conditioners in the tank. These may lead
to costly pump repairs that are not covered under warranty.
To reduce the possibility of contamination always protect against backow when
connected to the potable water system. A backow preventer may be required in some
municipalities. The backow preventer should be connected between the source system
hose bib and the water supply hose.
BACKFLOW PREVENTION
WARNING:WARNING:
WATER TANK VALVE
Located beneath the water tank, is a three-way valve. This valve allows you to control
the ow of water from the tank, including draining the tank during freezing weather.
When the valve handle is perpendicular to the valve body, the valve is in the closed position
(no water will ow from the tank).
Placing the valve handle parallel to the valve body, the valve is open allowing water to ow
in the direction of the arrow on the valve handle. When the arrow is pointing toward the hose
leading to the high-pressure pump, the tank is ready to supply water to the pump.
Placing the handle with the arrow pointing toward the open connection, the tank will now
drain allowing the tank to be cleaned or in preparation for freezing weather.
CLOSED
OPEN, PRESSURE
WASHING
OPEN, TANK
DRAINING
Loading ...
Loading ...
Loading ...