Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2410/SNT2410-FC 33
WARNING:
Never reach into the discharge chute or place any body part in front
of the snow blower when the unit is operating or when the battery pack(s) are installed.
Always ensure all moving parts have stopped and the battery pack(s) have been
removed before clearing any obstructions. Failure to follow these instructions can result
in serious personal injury.
◾
Take notice of the direction of the wind before beginning. When possible,
discharge snow in the same direction as the wind to prevent snow from being
thrown back into your face.
◾
Some parts of the snow blower can freeze under extreme weather conditions. Do
not attempt to operate the unit with frozen parts.
◾
When finished, allow the auger motor to run for an additional few minutes to
prevent moving parts from freezing, move the snow blower in self-propel mode
to ensure the wheels rotate freely, then operate the chute direction/pitch control
handle to rotate the chute from left to right and move the deflector up and down
to free it from any ice buildup. Make sure to clean off any snow and ice from the
base of the chute.
◾
In snowy and cold conditions, some controls and moving parts may freeze. Do not
use excessive force when trying to operate frozen controls. If you have difficulty
operating any control or part, start the snow blower as instructed in section
“STARTING/STOPPING THE SNOW BLOWER" and let it run for a few minutes.
Loading ...
Loading ...
Loading ...