Loading ...
Loading ...
Loading ...
56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2410/SNT2410-FC22
1. The battery compartment cover is
hinged. Raise the cover by lifting the
front of the cover.
2. The snow blower features dual battery
compartment, which allows the use of
two battery packs at the same time.
3. Align the grooves in the battery pack
with the raised ribs in one of the
battery compartments, and then insert
the battery pack into the compartment
(Fig. 6a).
4. Push the battery pack until you hear a
“click”. The battery-release button will spring up when the battery pack is securely
attached.
NOTICE: Make sure that the latch in the battery compartment(s) snaps into place and
that the battery pack(s) are secured to the unit before starting operation.
5. Attach the other battery pack into the other battery compartment in the same way.
6. To detach the battery pack, depress the battery-release button to release the
battery pack, and then lift it out of the compartment (Fig. 6b).
7. Close the battery compartment cover.
STARTING/STOPPING THE SNOW BLOWER
WARNING:
Do not attempt to override the operation of the safety button.
WARNING:
The operation of a snow blower can result in foreign objects being
thrown into your or others’ eyes, which can damage eyes severely. Always wear safety
glasses while operating the snow blower or while performing any adjustments or repairs on
the snow blower.
WARNING:
Ensure that other people and pets remain at least 100 ft (30 m) away
from the snow blower when it is in use.
WARNING:
The auger will continue to rotate for a few seconds after the snow
blower is turned off. Allow the auger to stop rotating before starting it again.
1
2
6b
Battery-Release
Button
Loading ...
Loading ...
Loading ...