Loading ...
Loading ...
Loading ...
Chapter 4 Wiring
●
If the device should connect with peripherals, it supports wiring with the RS-485 card reader, the
door lock, the exit buon, and the power supply.
Note
If the cable size is 18 AWG, you should use a 12 V power supply. And the distance between the
power supply and the device should be no more than 80 m.
●
If the device has no peripherals to be wired, it supports wiring with the power supply by using
the supplied adaptor.
4.1 Terminal Descripon
The terminals contains power input, RS-485, and door lock.
The terminal's diagram is as follows:
Figure 4-1 Terminal Diagram
The descripons of the terminals are as follows:
DS-K1T331 Series Face Recognion Terminal User Manual
10
Loading ...
Loading ...
Loading ...